李勤真,田润良,王金松,穆山,李军念,王玲.军用组合式集装箱联结器失效分析[J].装备环境工程,2011,8(5):8-12. LI Qin-zhen,TIAN Run-liang,WANG Jin-song,MU Shan,LI Jun-nian,WANG Ling.Failure Analysis of Military Assembled-container Connector[J].Equipment Environmental Engineering,2011,8(5):8-12.
军用组合式集装箱联结器失效分析
Failure Analysis of Military Assembled-container Connector
投稿时间:2011-03-09  修订日期:2011-10-15
DOI:
中文关键词:  军用组合式集装箱  联结器  失效分析  疲劳
英文关键词:military assembled-container  connector  failure analysis  fatigue
基金项目:总后勤部军事交通运输部 (交020101)
作者单位
李勤真 1. 天津大学,天津 300163;2. 军事交通学院,天津 300161 
田润良 军事交通学院,天津 300161 
王金松 军事交通学院,天津 300161 
穆山 总装备部工程设计研究总院,北京 100028 
李军念 1. 中国兵器工业第五九研究所,重庆 400039;2. 重庆市环境腐蚀与防护工程技术研究中心,重庆 400039 
王玲 1. 中国兵器工业第五九研究所,重庆 400039;2. 重庆市环境腐蚀与防护工程技术研究中心,重庆 400039 
AuthorInstitution
LI Qin-zhen 1. Tianjin University, Tianjin 300161, China; 2. Academy of Military Transportation, Tianjin 300161, China 
TIAN Run-liang Academy of Military Transportation, Tianjin 300161, China 
WANG Jin-song Academy of Military Transportation, Tianjin 300161, China 
MU Shan Engineering Design and Research Academy of GAD, Beijing 100028, China 
LI Jun-nian 1. No. 59 Institute of China Ordnance Industry, Chongqing 400039, China;2. Chongqing Engineering Research Center for Environmental Corrosion and Protection, Chongqing 400039, China 
WANG Ling 1. No. 59 Institute of China Ordnance Industry, Chongqing 400039, China;2. Chongqing Engineering Research Center for Environmental Corrosion and Protection, Chongqing 400039, China 
摘要点击次数:
全文下载次数:
中文摘要:
      简要介绍了军用组合式集装箱联结器常见的失效形式, 分析了各种失效的原因。指出军用组合式集装箱联结器在设计、 制造、 使用中的任何一个环节的不当, 都可能会造成其失效; 军用组合式集装箱联结器的失效原因, 涉及到从材料、 加工、 结构、 受力、 使用环境到相关零件分析的多个过程。给出了一些典型工程失效分析案例, 提出了相应的预防改进措施。
英文摘要:
      The main failure forms of military assembled-container connector were introduced and their possible causes were analyzed. It was put forward that any lapsus in the process of design, manufacture, and use would result in connector failure. The causes of connector failure can be related to the factors of material, machining, structure, operating loads and application environment. Some typical instances coming from practical production were provided and some measurements to improve and control part qualities were suggested.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第11976377位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号