| 林育锋,孔小东,田志强,吴港.两种紫铜在3.5%NaCl溶液中的腐蚀性能比较[J].装备环境工程,2011,8(5):29-34. LIN Yv-feng,KONG Xiao-dong,TIAN Zhi-qiang,WU Gang.Comparison on Corrosion Behavior of Two Kinds of Red Copper in 3.5% NaCl Solution[J].Equipment Environmental Engineering,2011,8(5):29-34. |
| 两种紫铜在3.5%NaCl溶液中的腐蚀性能比较 |
| Comparison on Corrosion Behavior of Two Kinds of Red Copper in 3.5% NaCl Solution |
| 投稿时间：2011-05-25 修订日期：2011-10-15 |
| DOI： |
| 中文关键词: 紫铜 极化 电化学阻抗谱 腐蚀 金相 |
| 英文关键词:red copper polarization electrochemical impendence spectroscopy corrosion microstructure |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 采用极化曲线和交流阻抗技术， 研究了2种紫铜在3.5% （质量分数） NaCl溶液中的腐蚀行为， 比较了其耐腐蚀性能。结果表明， 随着浸泡时间的延长， 2种紫铜的自腐蚀电位先降低再升高， 腐蚀速率先增大后减小。金相观察发现紫铜T2的第二相夹杂颗粒大小不均匀、 晶粒粗大， 经扫描电镜和能谱分析后发现其夹杂的成分不同， 这是导致其耐蚀性能出现差异的主要原因。 |
| 英文摘要: |
| Copper T2 and TuP were immersed in 3.5% NaCl solution. Polarization and electrochemical impedance spectroscopy methods were applied to analyze the corrosion behavior of the two kinds of red copper. The result showed that self-corrosion potential of the two kinds of copper first decline and then climbs up with immersed time, and corrosion rate first increases and then decreases as the time increases. Microstructure of copper T2 showed that second phase inclusions are uneven size and coarse grains, and inclusion composition is different though SEM and EDS, which is the main reason for its poor corrosion resistance. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
