| 郑旸,吴斌,杨森.折叠翼机构加载展开试验系统设计和仿真研究[J].装备环境工程,2013,10(2):38-42,95. ZHENG Yang,WU Bin,YANG Sen.Design and Simulation of Folding Wings Loading and Spreading Experimental Device[J].Equipment Environmental Engineering,2013,10(2):38-42,95. |
| 折叠翼机构加载展开试验系统设计和仿真研究 |
| Design and Simulation of Folding Wings Loading and Spreading Experimental Device |
| 投稿时间：2012-10-27 修订日期：2013-03-01 |
| DOI： |
| 中文关键词: 折叠翼 展开试验 加载装置 |
| 英文关键词:folding wings spreading experiment loading device |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 设计了一种折叠翼加载展开试验装置，并进行了不同装药量时的加载展开试验，测试了展开时间。建立了折叠翼机构仿真模型，在试验数据的基础上，确定了模型的加力情况。仿真数据表明，加载汽缸引起的附加质量对展开时间影响较小，加载试验方法可行；弹翼加上模拟升力后，展开时间比不加模拟升力长20%左右，对展开时间影响显著。 |
| 英文摘要: |
| A spreading experimental device was designed for folding wings. Loading and spreading experiments were carried out in different amount of powder and spreading time was measured. Simulation model of the folding wings was established and the loading of the model was determined with the experimental data. The simulation results showed that the additional mass caused by the loading cylinder barely impact on the spreading time; the experimental methods is feasible; the influence of simulated lift is significant, as the spreading time with the simulated lift is longer than without it by about20%. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
