| 李冬伟,任国全,郑鹏翱,李本.车载精密光电设备平顺性试验研究[J].装备环境工程,2013,10(2):56-61. LI Dong-wei,REN Guo-quan,ZHENG Peng-ao,LI Ben.Study on Riding Comfort of Vehicle-mounted Precise Photoelectric Device[J].Equipment Environmental Engineering,2013,10(2):56-61. |
| 车载精密光电设备平顺性试验研究 |
| Study on Riding Comfort of Vehicle-mounted Precise Photoelectric Device |
| 投稿时间：2012-10-16 修订日期：2013-03-01 |
| DOI： |
| 中文关键词: 平顺性试验 振动测试 车载光电设备 |
| 英文关键词:riding comfortable test vibration measurement vehicle-mounted photoelectric device |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 对某车载光电探测设备进行了平顺性试验研究。根据该光电设备的结构特点和性能要求，在旋转机座、俯仰转台和红外望远镜上选取3个测点，经试验得到了这3个测点在不同路况、不同车速情况下的加速度数据。通过对试验数据的整理，得出光电探测仪不同部位及整机的振动强度随车速变化曲线，为车载光电平台的减、隔振设计提供参考。 |
| 英文摘要: |
| The riding comfort test of vehicle-mounted photoelectric device was carried out. According to the construction characteristic and performance requirement of the photoelectric device, three different measuring points were selected in the rotated base, pitch table, and infrared telescope. The acceleration response data of different measuring points were collected with different road condition and different vehicle speed. Changing curves of vibration strength with speed of different points and complete system of the photoelectric device were obtained, which provide reference data for damp design of photoelectric device platform. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
