| 张闯.静电在火工品生产中的危害及防护[J].装备环境工程,2013,10(3):121-124. ZHANG Chuang.Electrostatic Harzard and Protection of Initiating Explosive Device during Production[J].Equipment Environmental Engineering,2013,10(3):121-124. |
| 静电在火工品生产中的危害及防护 |
| Electrostatic Harzard and Protection of Initiating Explosive Device during Production |
| 投稿时间：2013-04-11 修订日期：2013-05-01 |
| DOI：10.7643/issn.1672-9242.2013.03.029 |
| 中文关键词: 铜 火工品 静电危害 防护 |
| 英文关键词:initiating explosive device electrostatic hazard protection |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 在火工品生产中，静电是造成安全事故频发的重要原因，因此火工品生产和管理中的安全工作是各单位监管的重点。文中阐述了静电对火工品的危害，确定了火工品生产过程中的最大允许电压（即最大安全电压），从工艺方面提出了几种静电防护方法。 |
| 英文摘要: |
| Static is the important cause of safety accident during production of initiating explosive device. Therefore, safe operation of initiating explosive production is the focus of the supervision of each unit. Electrostatic hazard to the initiating explosive device was introduced. Maximum safety voltage during the initiating explosive device production was determined. Some safety precautions of electrostatic protection were put forward from the aspect of technology. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
