徐静,李海波,杨晋勇,郑德强,李振将.膜片组件贮存失效分析与加速贮存试验研究[J].装备环境工程,2013,10(4):52-55. XU Jing,LI Hai-bo,YANG Jin-yong,ZHENG De-qiang,LI Zhen-jiang.Storage Failure Analysis and Accelerated Storage Test of Diaphragm Assembly[J].Equipment Environmental Engineering,2013,10(4):52-55.
膜片组件贮存失效分析与加速贮存试验研究
Storage Failure Analysis and Accelerated Storage Test of Diaphragm Assembly
投稿时间：2013-02-19  修订日期：2013-07-01
DOI：10.7643/issn.1672-9242.2013.04.013
中文关键词:  膜片组件  贮存失效分析  加速贮存试验  恒定应力  统计分析
英文关键词:diaphragm assembly  failure analysis  accelerated storage test  constant stress  statistic analysis
基金项目:
作者单位
徐静 北京强度环境研究所可靠性与环境工程技术重点实验室，北京100076 
李海波 北京强度环境研究所可靠性与环境工程技术重点实验室，北京100076 
杨晋勇 北京精密机电控制设备研究所，北京100076 
郑德强 北京强度环境研究所可靠性与环境工程技术重点实验室，北京100076 
李振将 北京精密机电控制设备研究所，北京100076 
AuthorInstitution
XU Jing Science and Technology on Reliability and Environment Engineering Laboratory，Beijing Institute of Structure and Environment Engineering，Beijing100076，China 
LI Hai-bo Science and Technology on Reliability and Environment Engineering Laboratory，Beijing Institute of Structure and Environment Engineering，Beijing100076，China 
YANG Jin-yong Beijing Research Institute of Precise Mechatronics and Controls，Beijing100076，China 
ZHENG De-qiang Science and Technology on Reliability and Environment Engineering Laboratory，Beijing Institute of Structure and Environment Engineering，Beijing100076，China 
LI Zhen-jiang Beijing Research Institute of Precise Mechatronics and Controls，Beijing100076，China 
摘要点击次数:
全文下载次数:
中文摘要:
      膜片组件是影响某伺服系统贮存可靠性的关键部组件，在分析膜片组件在库房贮存条件下失效机理的基础上，通过有限元建模分析，预测了膜片组件的贮存主要失效模式。研究设计了膜片组件恒定温度应力加速贮存试验方案并实施试验，对膜片组件加速贮存试验获得的区间数据进行了插值处理，并对处理后的试验数据进行统计分析，得到了贮存条件下膜片组件的贮存期评估结论。
英文摘要:
      Diaphragm assembly is a critical component influencing storage reliability of servo system. Based on analysis of depot storage environment and the failure mechanism of diaphragm assembly, main storage failure modes of diaphragm assembly were predicted though finite element analysis. An accelerated storage test for the diaphragm assembly was designed and carried out. Linear interpolation algorithms were used to process the data obtained from the accelerated test of the diaphragm assembly. Through statistic analyzing of the processed data, the storage life of the diaphragm assembly under storage environment was evaluated.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第11994992位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编：400039     电话：023-68792835    Email: zbhjgc@163.com

视频号 公众号