| 尹凤雷,熊伟,李云仲.织物材料开口结构补强方法研究[J].装备环境工程,2013,10(4):114-116,125. YIN Feng-lei,XIONG Wei,LI Yun-zhong.Opening Structure Reinforcement Method of Textile Material[J].Equipment Environmental Engineering,2013,10(4):114-116,125. |
| 织物材料开口结构补强方法研究 |
| Opening Structure Reinforcement Method of Textile Material |
| 投稿时间：2013-01-27 修订日期：2013-07-01 |
| DOI：10.7643/issn.1672-9242.2013.04.027 |
| 中文关键词: 织物材料 开口 胶接 铆接 补强方法 |
| 英文关键词:textile material opening cementation riveting reinforcement method |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 对织物材料开口补强结构进行了试验分析研究，以开口处使用帆布扣连接的结构为基础，进行了直接加金属片、金属片胶接、金属片铆接3种补强结构的试验，并与未补强结构进行比较。试验结果表明直接加金属片不能提高结构强度，胶接金属片可提高强度28.5%，铆接金属片可提高强度73.1%。通过对相关数据及生产工艺上差别的分析，最终为类似开口结构补强设计的选择提供理论依据。 |
| 英文摘要: |
| Reinforcement structure of textile material opening was tested and analyzed. Three kinds of reinforcement structure, which were adding metal patch barely, cementing metal patch and riveting metal patch, were tested based on button joint structure of canvas. The result showed that the intensity is improved28.5% using metal patch cementation, and73.1% using metal patch riveting. The difference in manufacturing technique was analyzed. The purpose was to provide reference for reinforcement design of similar opening. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
