王晓梅,黄红军,万红敬,李志广,胡建伟.凹凸棒石/聚丙烯酸钠合成条件对其吸水吸湿性能的影响[J].装备环境工程,2013,10(6):104-107. WANG Xiao-mei,HUANG Hong-jun,WAN Hong-jing,LI Zhi-guang,HU Jian-wei.Effects of the Synthesis Condition of Dusty Attapulgite Mineral/ Sodium Polyacrylate Composite Material on Its Moisture-absorbing Properties[J].Equipment Environmental Engineering,2013,10(6):104-107.
凹凸棒石/聚丙烯酸钠合成条件对其吸水吸湿性能的影响
Effects of the Synthesis Condition of Dusty Attapulgite Mineral/ Sodium Polyacrylate Composite Material on Its Moisture-absorbing Properties
投稿时间:2013-06-21  修订日期:2013-07-15
DOI:10.7643/issn.1672-9242.2013.06.022
中文关键词:  聚丙烯酸钠  吸湿量  相对湿度  正交实验
英文关键词:sodium polyacrylate  constant humidity  relative humidity  orthogonal experiment
基金项目:国家自然科学基金青年基金(51103178)
作者单位
王晓梅 军械工程学院,石家庄050003 
黄红军 军械工程学院,石家庄050003 
万红敬 军械工程学院,石家庄050003 
李志广 军械工程学院,石家庄050003 
胡建伟 军械工程学院,石家庄050003 
AuthorInstitution
WANG Xiao-mei Department of Basic Courses,Ordnance Engineering College,Shijiazhuang050003,China 
HUANG Hong-jun Department of Basic Courses,Ordnance Engineering College,Shijiazhuang050003,China 
WAN Hong-jing Department of Basic Courses,Ordnance Engineering College,Shijiazhuang050003,China 
LI Zhi-guang Department of Basic Courses,Ordnance Engineering College,Shijiazhuang050003,China 
HU Jian-wei Department of Basic Courses,Ordnance Engineering College,Shijiazhuang050003,China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究中和度、交联剂用量、引发剂用量以及聚合单体丙烯酸钠含量等条件对其吸水吸湿性能的影响。初步探讨了同种材料的吸水和吸湿性能的关系。方法 以N,N′-2亚甲基双丙烯酰胺(MBAA)为交联剂,过硫酸钾为引发剂,采用水溶液聚合法合成了聚丙烯酸钠/凹凸棒石复合材料。结果由正交实验分别确定了吸水和吸湿用材料合成的最佳反应条件,其吸湿率最高达4.0g/ g、吸水倍率达到910倍。结论 凹凸棒石可以改良高吸水树脂的吸湿性能。
英文摘要:
      Objective To study the effects of the neutralization degree, the amount of cross-linking agent and initiator agent, and the content of sodium acrylate monomer on the moisture-absorbing properties. Methods In this paper, the authors synthesized the dusty attapulgite mineral/ sodium polyacrylate superabsorbent composite material by the water solution polymerization using MBAA as the cross-linking agent and potassium persulfate as the initiator agent. ResultsThe optimal reaction conditions for the synthesis of moisture and water absorbent material were determined through the orthogonal experiments. The optimum moisture absorbency of the material reached4.0g/ g based on the orthogonal experiment results and the deionizing water absorption was910g/g.Conclusion Attapulgite mineral can change the properties of sodium polyacrylate superabsorbent.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第11931209位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号