翁夏.两种工艺下某天线微通道冷板特性的实验研究[J].装备环境工程,2016,13(1):106-111. WENG Xia.Experimental Study on a Certain Antenna′ s Microchannel Cold-plates Machined by Two Techniques[J].Equipment Environmental Engineering,2016,13(1):106-111.
两种工艺下某天线微通道冷板特性的实验研究
Experimental Study on a Certain Antenna′ s Microchannel Cold-plates Machined by Two Techniques
投稿时间:2015-09-28  修订日期:2016-02-15
DOI:10.7643/issn.1672-9242.2016.01.019
中文关键词:  微通道  增材制造  真空钎焊  CT成像  冷板特性
英文关键词:microchannel  material additive manufacturing  vacuum brazing  CT imaging  characteristics of cold-plates
基金项目:国防基础科研重点项目 (JCKY2013210B004)
作者单位
翁夏 西南电子技术研究所,成都 610036 
AuthorInstitution
WENG Xia Southwest Institute of Electronics Technology,Chengdu 610036,China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究不同工艺下微通道冷板的特性及成因。方法 以实验研究为基础, 对两种工艺方式(增材制造和真空钎焊) 下的某天线微通道冷板进行流动和传热分析。另外, 还使用CT技术对两种冷板的内部结构进行成像。结果 获得了冷板特性数据和内部成像图片。结论 分析表明, 增材制造的微通道冷板具有良好的性能, 具备工程应用的潜力。
英文摘要:
      Objective To study the characteristics of microchannel cold-plates machined by different techniques and analyze the corresponding cause of formation. Methods Based on experimental study, the features of flow and heat transfer of the microchannel cold-plates processed by material additive manufacturing and vacuum brazing were analyzed. In addition, CT technology was used to image the inner structures of the two types of microchannel cold-plates. Results The characteristics and inner images of the cold-plates were obtained. Conclusion The analysis results indicated that the microchannel cold-plates machined by material additive manufacturing had good performance and could be applied in engineering projects.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第11702633位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号