陈超博,杨晓玉,饶勇.部队服役枪械外观快速修复研究[J].装备环境工程,2016,13(1):156-160. CHEN Chao-bo,YANG Xiao-yu,RAO Yong.Fast Exterior Repair of Firearms Servicing in the Army[J].Equipment Environmental Engineering,2016,13(1):156-160.
部队服役枪械外观快速修复研究
Fast Exterior Repair of Firearms Servicing in the Army
投稿时间:2015-09-11  修订日期:2016-02-15
DOI:10.7643/issn.1672-9242.2016.01.029
中文关键词:  枪械  外观修复  表面处理
英文关键词:firearms  exterior repair  surface treatment
基金项目:
作者单位
陈超博 驻二九六厂军代室,重庆 400054 
杨晓玉 驻二九六厂军代室,重庆 400054 
饶勇 驻二九六厂军代室,重庆 400054 
AuthorInstitution
CHEN Chao-bo No. 296 Factory Military Representative Office,Chongqing 400054,China 
YANG Xiao-yu No. 296 Factory Military Representative Office,Chongqing 400054,China 
RAO Yong No. 296 Factory Military Representative Office,Chongqing 400054,China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 快速修复部队服役枪械的外观质量。方法 基于部队的实际情况, 通过对枪械表面处理常用的镀铬工艺、 阳极氧化工艺、 黑色磷化工艺和喷漆工艺的分析, 提出了一套部队可用的枪械快速修复外观的方法, 即铁件采用黑色磷化工艺处理, 铝件和塑料件采用表面喷漆的工艺来处理。结果通过将该方法到部队实际应用, 证明了该方法的可行性。结论 该方法操作简单、 快捷, 达到了部队可自行快速修复的目的。
英文摘要:
      Objective To find a way to quickly repair the appearance quality of the armed firearms. Methods Based on the actual situation of the army, this paper studied the surface treatment technology such as chromate technology, anodic oxidation technology, black phosphating technology and spray painting technology, which were often used in surface treatment of firearms. A method for quickly repairing the appearance quality was correspondingly put forward, i.e., the iron parts were treated by black phosphating process, and the aluminum parts and plastic parts were treated by surface spray painting. Results The feasibility of the method was proved by using the method in the practical application. Conclusion The method is simple and fast, and can be used to quickly repair appearance quality of the armed firearms by the army.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第11702022位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号