| 张昭,唐虎,张亚娟.基于标准分析军用飞机实验室淋雨试验参数设计[J].装备环境工程,2017,14(9):43-47. ZHANG Zhao,TANG Hu,ZHANG Ya-juan.Analysis of Parameters Setting in Military Aircraft Laboratory Rain Test Based on Standards[J].Equipment Environmental Engineering,2017,14(9):43-47. |
| 基于标准分析军用飞机实验室淋雨试验参数设计 |
| Analysis of Parameters Setting in Military Aircraft Laboratory Rain Test Based on Standards |
| 投稿时间：2017-05-04 修订日期：2017-09-15 |
| DOI：10.7643/ issn.1672-9242.2017.09.009 |
| 中文关键词: 军用飞机 淋雨试验 降雨强度 雨滴直径 |
| 英文关键词:military aircraft rain test rainfall rate droplet size |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 对军用飞机淋雨试验进行降雨参数设计，为军用飞机实验室淋雨试验参数设计提供参考。方法 采用逐一分析，横向对比的方法，对国军标中部分与淋雨试验相关的六个标准，以及国外的三个标准，在降雨强度、雨滴直径及降雨方向等的参数设置进行分析。结果 总结降雨强度设计的规律以及各标准在实验室淋雨试验设计时的作用，给出飞机水密性淋雨试验和除雨性能淋雨试验的部分降雨参数设计。结论 给出的降雨强度参数符合各标准的要求，所总结的规律建立在深层理解各个标准的基础上，为军用飞机实验室淋雨试验参数设计提供了参考。 |
| 英文摘要: |
| Objective To design rainfall parameters for rain test of military aircraft rain test, and finally provide reference for parameters setting for laboratory rain test of military aircraft. Methods The six GJB standards and other three foreign standards were analyzed individually, and compared in parameters including rainfall rate, droplet size, duration time, rain angle, etc. Results The rules on design rainfall intensity and roles of each standard in designing laboratory rain test were summarized. Some rainfall parameters for rain test for water tightness and rain removal performance of aircraft were given. Conclusion The given value on rainfall intensity meets the requirements of all the standards. The rules summarized are established based on in-depth understanding of each standard. All these provide reference for parameters setting for laboratory rain test of military aircraft. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
