董素荣,刘卓学,刘瑞林.离心压气机增效扩稳技术研究及高海拔应用[J].装备环境工程,2017,14(10):19-25. DONG Su-rong,LIU Zhuo-xue,LIU Rui-lin.Stability and Efficiency Improvement of Centrifugal Compressor and the Application at High Altitude[J].Equipment Environmental Engineering,2017,14(10):19-25.
离心压气机增效扩稳技术研究及高海拔应用
Stability and Efficiency Improvement of Centrifugal Compressor and the Application at High Altitude
投稿时间:2017-05-17  修订日期:2017-10-15
DOI:10.7643/issn.1672-9242.2017.10.004
中文关键词:  高海拔  离心压气机  叶片弯掠  机匣处理
英文关键词:high altitude  centrifugal compressor  blade lean and sweep  casing treatment
基金项目:
作者单位
董素荣 军事交通学院 a.军用车辆系,天津 300161 
刘卓学 军事交通学院 b.研究生管理大队,天津 300161 
刘瑞林 军事交通学院 a.军用车辆系,天津 300161 
AuthorInstitution
DONG Su-rong Military Transportation University a. Military Vehicle Department, Tianjin 300161, China 
LIU Zhuo-xue Military Transportation University b. Postgraduate Training Brigade, Tianjin 300161, China 
LIU Rui-lin Military Transportation University a. Military Vehicle Department, Tianjin 300161, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为提高离心压气机高海拔气动性能提供新的研究方法。方法 分析叶片弯/掠造型及机匣处理两种压气机增效扩稳的技术及机理,并采用数值模拟的方法对比分析了海拔5500 m条件下原型叶轮及采用叶片前掠叶轮的气动性能。结果 相比于原型叶轮,采用前掠叶型的压比最多可提高3.09%,效率可提高0.71%,叶轮流道内流动损失减小,叶轮高海拔气动性能得到了提升。结论 对低雷诺数下离心压气机机匣处理结构的应用有一定的指导作用。
英文摘要:
      Objective To provide a new method to improve the aerodynamic performance of centrifugal compressor at high altitude. Methods This paper enumerated the technologies of bowed/swept blade and casing treatment, illustrated the principle of enhancing the efficiency and enlarging the stable working range of centrifugal compressor, and made a comparative analysis on the aerodynamic performance of the original impeller and the swept-blade impeller under the altitude of 5500 m. Results Compared with the original impeller, the pressure ratio of the optimized impeller could be increased by 3.09% at most. The efficiency could be increased by 0.71%. The flow loss in the impeller runner was reduced. And the aerodynamic performance of the impeller at high altitude was improved. Conclusion It still has some guiding for the researching on the application of the casing treatment for centrifugal compressor at high altitude.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第11873282位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号