刘海燕,马建军,吴相甫.大型气候实验室高低温模拟系统关键技术研究[J].装备环境工程,2018,15(11):79-84. LIU Hai-yan,MA Jian-jun,WU Xiang-fu.Key Issues on Extreme High and Low Temperature Simulation Systems for Large Climatic Laboratory[J].Equipment Environmental Engineering,2018,15(11):79-84.
大型气候实验室高低温模拟系统关键技术研究
Key Issues on Extreme High and Low Temperature Simulation Systems for Large Climatic Laboratory
投稿时间:2018-08-15  修订日期:2018-11-25
DOI:10.7643/ issn.1672-9242.2018.11.015
中文关键词:  气候实验室  空气处理系统  载冷/载热系统  充注/排空  融霜
英文关键词:climatic laboratory  air handling system  secondary refrigerant system  charge/drain  defrost
基金项目:
作者单位
刘海燕 中国飞机强度研究所,西安 710065 
马建军 中国飞机强度研究所,西安 710065 
吴相甫 中国飞机强度研究所,西安 710065 
AuthorInstitution
LIU Hai-yan Aircraft Strength Research Institute of China, Xi?an 710065, China 
MA Jian-jun Aircraft Strength Research Institute of China, Xi?an 710065, China 
WU Xiang-fu Aircraft Strength Research Institute of China, Xi?an 710065, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 突破关键技术,获得适用于大型气候实验室的高低温环境模拟系统方案。方法 通过分析大型气候实验室载冷/载热系统和空气处理系统的工作原理和工作模式,指出高低温环境模拟系统在可能遇到的极端温度下存在的安全风险,从低温试验工况推断出换热器结霜的必然性。根据载冷剂物性设计规避系统安全风险和融霜的技术方案。结果 在AS-6系统和CH2CL2系统的二次循环中设计了充注/排空功能,规避了载冷/载热系统的安全风险。设计了内外融霜结合的融霜方案,进行换热器融霜。结论 试验和工程应用证明,通过增加载冷剂充注/排空方案和换热器融霜方案完善的大型气候实验室的高低温环境模拟系统方案合理可行,采用的关键技术可以指导类似系统设计。
英文摘要:
      Objective To break through key technology and obtain the high and low temperature environment simulation system scheme for large climatic laboratory. Methods The workflow and work model of the secondary refrigerant system and air handling system were analyzed. Safety risks of the high and low temperature environment simulation system at extreme temperature were found. The necessity of frost in exchanger in low temperature test was deduced. Then a technical scheme for avoiding safety risk and frost was developed for secondary refrigerant. Results A charge/drain function is designed for secondary circulation of AS-6 and CH2CL2 systems to avoid the safety risks of secondary refrigerant. The inner and outer defrosting systems are combined to defrost the exchanger. Conclusion The auxiliary system solves the safety and frost problems in the temperature simulation systems and can be used in other similar projects.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第11935042位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号