刘俊杰,卢耀辉,党林媛,肖柯宇,张德文,朱生长.基于FAD的铝合金车体焊接缺陷安全性评价方法研究[J].装备环境工程,2018,15(12):98-103. LIU Jun-jie,LU Yao-hui,DANG Lin-yuan,XIAO Ke-yu,ZHANG De-wen,ZHU Sheng-chang.Methods for Safety Assessment of Welding Defects for Aluminum Alloy Body Based on FAD[J].Equipment Environmental Engineering,2018,15(12):98-103.
基于FAD的铝合金车体焊接缺陷安全性评价方法研究
Methods for Safety Assessment of Welding Defects for Aluminum Alloy Body Based on FAD
投稿时间:2018-07-18  修订日期:2018-12-25
DOI:10.7643/ issn.1672-9242.2018.12.018
中文关键词:  铝合金焊接车体  焊接缺陷  FAD曲线  安全性评价  缺陷表征  有限元分析
英文关键词:aluminum alloy welded body  welding defects  FAD curve  safety assessment  characterization of defects  finite element analysis
基金项目:国家自然科学基金项目(51275428);四川省科技厅国际合作项目(2018HH0072);四川省大学生创新创业训练计划项目(SRTP:2018019)
作者单位
刘俊杰 西南交通大学 机械工程学院,成都 610031 
卢耀辉 西南交通大学 机械工程学院,成都 610031 
党林媛 西南交通大学 机械工程学院,成都 610031 
肖柯宇 西南交通大学 机械工程学院,成都 610031 
张德文 西南交通大学 机械工程学院,成都 610031 
朱生长 西南交通大学 机械工程学院,成都 610031 
AuthorInstitution
LIU Jun-jie School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China 
LU Yao-hui School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China 
DANG Lin-yuan School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China 
XIAO Ke-yu School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China 
ZHANG De-wen School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China 
ZHU Sheng-chang School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 确保高速列车运行安全,采用先进的方法和理论对焊接缺陷进行评定显得非常重要。方法 采用断裂力学和有限元相结合的方法,建立车体全比例有限元模型。采用热弹塑性法对焊接残余应力进行有限元数值仿真。基于标准BS 7910提供的焊接缺陷评价方法,对焊接缺陷进行安全性评定。结果 对车体带焊缝的有限元模型,依据BS EN12663标准施加车体所承受的载荷,获取焊缝关注点的应力转化所得到一次应力。根据关注点信息建立所在焊缝处的接头模型进行热弹塑性仿真模拟,从而获取该关注点残余应力数值及分布转化所得到二次应力。将焊接缺陷进行裂纹当量化,从而计算得到载荷比与应力强度因子比值,结合许用FAD曲线,对高速列车铝合金车体上焊缝关注点进行安全性评价。结论 该方法对车体这种大型复杂焊接结构的安全性进行评价是可行的,并对焊接缺陷是否合于使用提出质量控制的建议。
英文摘要:
      Objective To ensure safety of high-speed trains, it is very important to evaluate welding defects with advanced method and theory. Methods Based on combination of fracture mechanics and finite element method, a full scale finite element model of body was established. Finite element numerical simulation of welding residual stress was carried out with the therm-elastic method. The safety of welding defects was evaluated based on the assessment of welding defects provided by standard BS7910. Result For the finite element model of the body including the weld seam, the load was applied to the body according to standard BS EN12663. The primary stress was obtained by transforming stress of the weld points of interest. Ac-cording to the information of the point of interest, the finite element model of the welded joint was established. And the simulation was carried out based on the therm-elastic method to obtain the residual stress of the point of interest which is further transformed into the secondary stress. Finally, the welding defects were quantitatively in combination with the above-mentioned primary stress and secondary stress, the ratio of the load ratio to the stress intensity factor was further calculated. Combined with the FAD curve, safety of the focus points on the aluminum alloy body of the high-speed train was evaluated. Conclusion This method is feasible for evaluating the safety of a large and complex welded structure like the train body. Suggestions on quality control for the use of welding defects are proposed.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12761546位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号