徐如远,袁宏杰,李鹏,李佩昌.基于薄弱环节的整机加速因子计算[J].装备环境工程,2019,16(3):1-4. XU Ru-yuan,YUAN Hong-jie,LI Peng,LI Pei-chang.Whole Machine Acceleration Factor Based on Weak Links[J].Equipment Environmental Engineering,2019,16(3):1-4.
基于薄弱环节的整机加速因子计算
Whole Machine Acceleration Factor Based on Weak Links
投稿时间:2018-07-11  修订日期:2019-03-25
DOI:10.7643/ issn.1672-9242.2019.03.001
中文关键词:  贮存寿命  加速因子  薄弱环节
英文关键词:storage life  accelerating factor  weak link
基金项目:国防基础科学研究计划
作者单位
徐如远 1. 北京航空航天大学 可靠性与系统工程学院,北京 100191 
袁宏杰 1. 北京航空航天大学 可靠性与系统工程学院,北京 100191 
李鹏 2. 中国舰船研究设计中心,武汉 430064 
李佩昌 2. 中国舰船研究设计中心,武汉 430064 
AuthorInstitution
XU Ru-yuan 1. School of Reliability and Systems Engineering, Beihang University, Beijing 100191, China 
YUAN Hong-jie 1. School of Reliability and Systems Engineering, Beihang University, Beijing 100191, China 
LI Peng 2. China Ship Development and Design Center, Wuhan 430064, China 
LI Pei-chang 2. China Ship Development and Design Center, Wuhan 430064, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 当薄弱环贮存寿命都服从指数分布或都服从形状参数相同的威布尔分布时,给出整机加速因子与薄弱环节加速因子关系的公式;若形状参数不同时,给出整机加速因子的取值范围。方法 将各个薄弱环节做串联系统处理,利用不同可靠度时常应力和加速应力下系统贮存寿命的关系,计算整机加速因子或给出加速因子范围。结果 基于不同薄弱环节数据,总结出整机加速因子或取值范围的计算方法。结论 针对系统存在薄弱环节并且薄弱环节寿命服从一定的分布时,可以通过该方法计算出整机加速因子或加速因子的取值范围。
英文摘要:
      Objective To give the formula for the relationship between the acceleration factor of the whole machine and the acceleration factor of the weak link when the storage life of the weak ring is subject to the exponential distribution or to the Weibull distribution with the same shape parameters, and give the whole machine acceleration factor value range when the shape parameters are different. Methods Each weak link was treated as a series system. When degrees of reliability were different, the relationship between normal stress and the storage life of the system under accelerated stress was used to calculate the entire acceleration factor or to give the range of acceleration factors. Results Based on the data of different weak links, the calculation method for the acceleration factor or range of the complete machine was summarized. Conclusion When the weak link exists in the system and the life of the weak link obeys a certain distribution, the range of the acceleration factor or acceleration factor of the complete machine could be calculated by proposed method.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第11716665位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号