刘东俭,沈玥,朱淮烽.整车强化腐蚀试验转场判定的方法[J].装备环境工程,2019,16(8):. LIU Dong-jian,SHEN Yue,ZHU Huai-feng.Evaluation Method for Test Ground Transferring of Vehicle Corrosion Test[J].Equipment Environmental Engineering,2019,16(8):.
整车强化腐蚀试验转场判定的方法
Evaluation Method for Test Ground Transferring of Vehicle Corrosion Test
投稿时间:2019-01-04  修订日期:2019-01-17
DOI:10.7643/issn.1672-9242.2019.08.005
中文关键词:  整车腐蚀  转场对标  腐蚀强度  评价
英文关键词:corrosion test  transferring test grounds  corrosion depth  evaluation
基金项目:
作者单位
刘东俭 中汽中心盐城汽车试验场有限公司,江苏 盐城 224100 
沈玥 中汽中心盐城汽车试验场有限公司,江苏 盐城 224100 
朱淮烽 中汽中心盐城汽车试验场有限公司,江苏 盐城 224100 
AuthorInstitution
LIU Dong-jian CATARC Yancheng Automotive Providing Ground Co., Ltd, Yancheng 224100, China 
SHEN Yue CATARC Yancheng Automotive Providing Ground Co., Ltd, Yancheng 224100, China 
ZHU Huai-feng CATARC Yancheng Automotive Providing Ground Co., Ltd, Yancheng 224100, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了保证在不同试验场转场试验结果的一致性,整理出一套合理的转场验证流程。方法 对整车强化腐蚀试验需要用到的特殊道路、设备进行考察,再通过对比不同试验场试验车辆的结果,通过层层验证并对最终结果进行加权计算,得出最终的结果一致性。结果 首先验证道路及设备的基本参数,然后对整车腐蚀试验结果的腐蚀深度(D)及划线扩蚀量(L)一致性进行验证,所有基本参数都通过后,最终对整车所有零部件主观评价得分(G)进行对比。得分对比的结果结合市场反馈的质量问题配比进行加权计算,最终得出两试验场试验一致性的数值86.2%(R)。结论 利用该方法可以全方位地将试验场之间进行对比,科学地判定试验场是否满足整车强化腐蚀试验的转场要求。
英文摘要:
      Objective To sort out a series of reasonable verification process before transferring test grounds to ensure the consistency of the test results in different grounds. Methods Roads, equipment and facilities to be used for intensified vehicle corrosion test were investigated and the results of vehicles in different test grounds were compared. Finally, the consistency of the final results was obtained by means of multi-layer verification and weighted calculation. Results Firstly, basic parameters of road and equipment were verified. Then the consistency of corrosion depth (D) and scribe lines (L) was verified. After all the basic parameters passed the verification, the subjective evaluation grades of all parts of the whole vehicle were compared. The result of grades comparison was weighted by the proportion of quality problems given by market feedback. Finally, the consistent values (G) 86.2% of the two test sites were obtained. Conclusion This method can be used to comprehensively compare the test fields and scientifically determine whether the test field meets the requirements on test ground transferring of the vehicle corrosion test.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第11708232位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号