王楠.基于ASM-MBF的阵列互耦补偿方法[J].装备环境工程,2020,17(4):58-64. WANG Nan.Array Mutual Coupling Compensation Method Based on ASM-MBF[J].Equipment Environmental Engineering,2020,17(4):58-64.
基于ASM-MBF的阵列互耦补偿方法
Array Mutual Coupling Compensation Method Based on ASM-MBF
投稿时间:2019-09-18  修订日期:2019-11-02
DOI:10.7643/issn.1672-9242.2020.04.010
中文关键词:  矩量法  宏基函数  无限阵列近似  阵列综合  互耦补偿
英文关键词:MoM  macro basis function  infinite array approximation  array synthesis  mutual coupling compensation
基金项目:
作者单位
王楠 海装驻广州局驻昆明地区第一军事代表室,昆明 650000 
AuthorInstitution
WANG Nan Kunming First Military Representative Bureau of Nary Equipment Department, Kunming 650000, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 解决传统矩量法在分析阵列互耦时存在未知数过多、计算慢的问题。方法 研究一种结合宏基函数思想和无限阵列近似的,可用于大型阵列的互耦分析方法——ASM-MBF,通过构建MBF高阶宏基函数,来缩减矩量法计算时产生的矩阵规模。为减小大型阵列的单一激励电流分布的求解难度,利用无限阵列的单一激励电流分布进行近似分析,并且通过阵列扫描法(ASM)进行求解。将其结果和已经得到广泛使用的RWG-MOM计算结果进行对比,随后在ASM-MBF方法的基础上,求解得到阵列的互阻抗矩阵,并用互阻抗矩阵对传统的不考虑单元间互耦的阵列综合问题进行补偿修正。结果 随着单元上MBF的个数的增加,RWG-MOM方法与ASM-MBF方法的计算结果的误差逐渐降低,在单元上MBF数目为4的时候,两种方法的误差仅为-140 dB,而此时ASM-MBF法未知数数量仅为RWG-MOM法的5%。在阵元间距不同的情况下,所使用的互耦补偿方法均取得优良的补偿效果,尤其在间距较小,互耦的影响较大时,补偿后的方向图已十分接近理想情况。结论 ASM-MBF方法可以在考虑精度的同时实现矩阵降阶,使用该方法计算得到互阻抗矩阵,可对传统的不考虑单元间互耦的阵列综合问题进行有效补偿。
英文摘要:
      The work aims to solve the problem that the MoM has too many unknowns and slow calculation in the analysis of array mutual coupling. A mutual coupling analysis method-ASM-MBF which combines macro-base function and infinite array approximation and can be used in the large array was studied. By constructing the MBF high-order macro-base function, the matrix size generated by MoM was reduced. In order to reduce the difficulty of solving the single excitation current distribution of large arrays, the single excitation current distribution of the infinite array was used for approximate analysis and the solution was made by array scanning method (ASM). The results were compared with that calculated by widely used RWG-MOM. Then, based on the ASM-MBF method, the mutual impedance matrix of the array was obtained. The mutual impedance matrix was used to compensate the traditional array synthesis problem without considering mutual coupling between cells. With the increase of the number of MBF on element, the error of the calculation results of RWG-MOM and ASM-MBF was gradually reduced. When the number of MBFs on the unit was 4, the error of the two methods was only -140 dB. At this time, the number of unknowns by ASM-MBF was only 5% of that by RWG-MOM. In case of different element spacing, the mutual coupling compensation methods used achieved excellent compensation effects. Especially when the spacing was small and the influence of mutual coupling was large, the compensated pattern was very close to the ideal situation. The ASM-MBF method can achieve matrix reduction while considering accuracy. Calculating the mutual impedance matrix by this method can effectively compensate the traditional array synthesis problem without considering mutual coupling between cells.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第11983925位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号