高翔,徐健,薛东文,燕群,霍施宇.短舱进气道复合材料声衬声学特性试验研究[J].装备环境工程,2020,17(9):100-105. GAO Xiang,XU Jian,XUE Dong-wen,YAN Qun,HUO Shi-yu.Acoustic Performance Test on Nacelle Inlet Composite Material Annular Acoustic Liner[J].Equipment Environmental Engineering,2020,17(9):100-105. |
短舱进气道复合材料声衬声学特性试验研究 |
Acoustic Performance Test on Nacelle Inlet Composite Material Annular Acoustic Liner |
投稿时间:2020-07-11 修订日期:2020-08-11 |
DOI:10.7643/issn.1672-9242.2020.09.018 |
中文关键词: 短舱进气道 环形复材声衬 声模态识别 声学试验 |
英文关键词:nacelle inlet composite material annular acoustic liner acoustic mode identification acoustic test |
基金项目: |
|
Author | Institution |
GAO Xiang | Laboratory of Aeroacoustics and Vibration Aviation Technology, Aircraft Strength Research Institute, Xi¢an 710065, China |
XU Jian | Laboratory of Aeroacoustics and Vibration Aviation Technology, Aircraft Strength Research Institute, Xi¢an 710065, China |
XUE Dong-wen | Laboratory of Aeroacoustics and Vibration Aviation Technology, Aircraft Strength Research Institute, Xi¢an 710065, China |
YAN Qun | Laboratory of Aeroacoustics and Vibration Aviation Technology, Aircraft Strength Research Institute, Xi¢an 710065, China |
HUO Shi-yu | Laboratory of Aeroacoustics and Vibration Aviation Technology, Aircraft Strength Research Institute, Xi¢an 710065, China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 应用旋转声模态发生试验系统测试无缝复材声衬试验件的传递损失声学特性。方法 根据短舱进气道声衬实际应用环境,采用整体环状成型工艺和无缝拼接技术,针对性地设计研制出复合材料制成的环形无缝进气道声衬。利用风扇旋转声模态发生试验系统开展基于旋转径向传声器阵列的管内声模态测试识别方法研究,并发展相应的模态测试装置。结果 设计的无缝复材声衬在目标工况下降噪效果良好。结论 基于旋转径向传声器阵列可同时识别径向和周向声模态,并显著减小所用传声器总数。 |
英文摘要: |
The paper aims to test the acoustic characteristics of transmission loss of seamless composite acoustic liner test pieces with the rotating acoustic mode generation test system. Considering the actual potential application environment characteristic of acoustic liner in the aero-engine nacelle inlet, the seamless annular acoustic liner made of composite materials was designed and developed by the whole circle forming process and seamless stitching technology. Based on the spinning radial microphone array, the method and the test rig of acoustic mode test and identification were developed by applying in rotating acoustic mode generation test system. The corresponding mode test device was developed. The experimental results showed that the designed seamless composite acoustic liner has a good noise reduction effect under the target condition. The spinning radial microphone array can both identity the radial and circular acoustic mode and apparently reduce the microphones used. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|