蔡志军,闵强,余继红.战斗机阻力伞载荷计算研究[J].装备环境工程,2020,17(9):122-128. CAI Zhi-jun,MIN Qiang,YU Ji-hong.Load Calculation of Drag Parachute for Fighter[J].Equipment Environmental Engineering,2020,17(9):122-128.
战斗机阻力伞载荷计算研究
Load Calculation of Drag Parachute for Fighter
投稿时间:2020-06-30  修订日期:2020-07-07
DOI:10.7643/issn.1672-9242.2020.09.022
中文关键词:  阻力伞  流固耦合  火箭滑车试验  统计分析  载荷谱
英文关键词:drag parachute  fluid solid coupling  rocket sled test  statistical analysis  load spectrum
基金项目:
作者单位
蔡志军 中国航空工业集团有限公司成都飞机设计研究所,成都 610091 
闵强 中国航空工业集团有限公司成都飞机设计研究所,成都 610091 
余继红 中国航空工业集团有限公司成都飞机设计研究所,成都 610091 
AuthorInstitution
CAI Zhi-jun AVIC Chengdu Aircraft Design & Research Institute, Chengdu 610091, China 
MIN Qiang AVIC Chengdu Aircraft Design & Research Institute, Chengdu 610091, China 
YU Ji-hong AVIC Chengdu Aircraft Design & Research Institute, Chengdu 610091, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 通过对战斗机阻力伞载荷计算开展研究,为阻力伞安装支持结构的静强度和疲劳强度分析提供支持。方法 分别运用工程计算方法、流固耦合数值模拟方法,并对比阻力伞火箭滑车试验实测数据,对阻力伞载荷计算开展研究。同时基于飞参数据,运用统计学方法对影响阻力伞载荷大小和方向的开伞速度、飞机俯仰角、侧风速度与方向等参数进行统计分析,为载荷谱编制提供数据基础。结果 确定阻力伞载荷工程计算方法中动载系数k取为1.2,将一次放伞的载荷历程简化为以拉直力和张满力为峰值的两个载荷循环,且拉直力为张满力的50%。以某型飞机766架起落飞参数据为基础,运用皮尔逊Ⅲ型分布、指数分布对开伞速度、飞机俯仰角、侧风速度与方向等参数进行拟合,结合阻力伞载荷计算方法,得出阻力伞载荷大小和方向分布的统计规律。结论 明确了阻力伞载荷计算方法及计算相关参数选取,同时提出一种符合战斗机实际使用环境的阻力伞载荷谱编制方法。
英文摘要:
      The paper aims to provide support for the static strength and fatigue strength analysis of the installation support structure of the drag parachute through research on the load calculation of the fighter drag parachute. By using engineering calculation method, fluid structure coupling numerical simulation method, and comparing the measured data of drag parachute rocket pulley test, the load calculation of drag parachute was studied. At the same time, based on the flight data, drag parachute release velocity, aircraft pitch angle, cross-wind velocity, direction and other parameters affecting the drag parachute load were statistically analyzed, to provide data base for compilation of load spectrum. The dynamic load coefficient k was determined to be 1.2 in engineering calculation method of parachute load, and the load history of parachute releasing was simplified as two load cycles with the peak value of stretching force and tension force, and the straightening force was 50% of the full tension force. Based on 766 takeoff and landing flight data of a certain type of aircraft, the parachute release velocity, aircraft pitch angle, cross-wind velocity and direction were fitted by Pearson Ⅲ distribution and exponential distribution. Combined with the calculation method of drag parachute load, the statistical law of drag parachute load value and direction distribution was obtained.The calculation method of parachute load and the selection of relevant parameters are defined. At the same time, a compilation method of parachute load spectrum in accordance with the actual use environment of fighter is proposed.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12029851位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号