李清蓉,包名,江洪流.直升机尾部结构疲劳及缺陷容限试验装置研制及应用[J].装备环境工程,2023,20(5):42-50. LI Qing-rong,BAO Ming,JIANG Hong-liu.Development and Application of Fatigue and Flaw Tolerance Test Device on Helicopter Tail Structure[J].Equipment Environmental Engineering,2023,20(5):42-50.
直升机尾部结构疲劳及缺陷容限试验装置研制及应用
Development and Application of Fatigue and Flaw Tolerance Test Device on Helicopter Tail Structure
  
DOI:10.7643/issn.1672-9242.2023.05.007
中文关键词:  尾部结构  疲劳及缺陷容限  试验方法  冲击  无损检测中图分类号:V216 文献标识码:A 文章编号:1672-9242(2023)05-0042-09
英文关键词:tail structure  fatigue and flaw tolerance  test method  impact  nondestructive testing
基金项目:
作者单位
李清蓉 中国直升机设计研究所,江西 景德镇 333001 
包名 中国直升机设计研究所,江西 景德镇 333001 
江洪流 南昌航空大学,南昌 330063 
AuthorInstitution
LI Qing-rong China Helicopter Research and Development Institute, Jiangxi Jingdezhen, 333001, China 
BAO Ming China Helicopter Research and Development Institute, Jiangxi Jingdezhen, 333001, China 
JIANG Hong-liu Nanchang Hangkong University, Nanchang 330063, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 获得尾部结构的疲劳寿命和检查周期,满足民用直升机适航验证要求,保证飞机的飞行安全,开展复合材料尾部结构疲劳及缺陷容限试验技术研究。方法 介绍了尾部结构疲劳及缺陷容限试验专用试验台、气动冲击设备、柔性自动特征扫描成像无损检测系统等的设计及研制,采用研制的成套试验装置,实现尾部结构试验件连接约束和载荷边界的全面真实模拟、复杂载荷谱的精确控制、冲击损伤缺陷预制及缺陷自动识别与检测。结果 经试验验证,载荷误差小于2%,冲击能量误差小于2%,缺陷检测误差小于1 mm,各项指标都满足项目研究目标和技术指标要求。结论 研究成果在民用直升机研制中得到了成功应用,可为后续其他直升机尾部结构疲劳及缺陷容限疲劳试验提供良好的借鉴,具有重要的工程应用价值。
英文摘要:
      The work aims to study the fatigue and flaw tolerance test technology of composite tail structure, in order to obtain the fatigue life and check interval of tail structure, meet the airworthiness verification requirements of civil helicopters and ensure the flight safety of helicopters. The design and development of the specialized test bench, pneumatic impact equipment, flexible automatic scanning and imaging nondestructive testing system for the fatigue and flaw tolerance test of tail structure were described. With the whole set of test devices, the connecting restriction and load boundary of the tail structure specimen were simulated fully, the complex load spectrum was controlled accurately, the impact flaws were prefabricated and the flaws were detected automatically. The experimental results indicated that the load error was less than 2%, the impact energy error was less than 2% and the error of flaw detection was less than 1 mm. All indicators satisfied the research objectives and technical indicators of the project. The research results have been successfully applied in the development of civil helicopters, which can provide a good reference for other helicopter tail structure fatigue and flaw tolerance tests, and has important engineering application value.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第11969027位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号