美军航空装备腐蚀防控验证方法跟踪研究

李明; 杨昭君; 张蕾; 邢朝君; 傅耘

doi:10.7643/issn.1672-9242.2026.03.001

PDF(4390 KB)

装备环境工程 ›› 2026, Vol. 23 ›› Issue (3) : 1-9. DOI: 10.7643/issn.1672-9242.2026.03.001

专刊——装备服役环境与性能试验

美军航空装备腐蚀防控验证方法跟踪研究

李明¹, 杨昭君¹, 张蕾², 邢朝君², 傅耘^1,*

作者信息 +

Follow-up Study on Verification Methods for Corrosion Prevention and Control of US Military Aviation Equipment

LI Ming¹, YANG Zhaojun¹, ZHANG Lei², XING Zhaojun², FU Yun^1,*

Author information +

文章历史 +

摘要

从模式、方式、技术3个层面系统分析了美军航空装备腐蚀防控验证方法的主要发展历程、发展方向,并提出了我国航空装备腐蚀防控验证工作的建议。首先,梳理总结了美军航空装备腐蚀防控验证经历的3种模式,分析了不同验证模式的验证要求、验证内容和主要特点。其次,结合美军装备腐蚀防控验证工作的最新要求和MIL-STD-810H相关技术内容的最新修订情况,分析了腐蚀防控“积木式”验证的基本架构、设计思路、主要优势和相关要求。最后,通过实例从实验室腐蚀试验和数字化验证2个方面,分析了美军航空装备腐蚀防控验证技术的发展趋势、发展重点和技术特点。通过对美军航空装备腐蚀防控验证方法的系统性梳理与对比剖析,揭示了腐蚀防控验证由单一试验向全寿命周期体系化验证演进的内在逻辑,可为构建适应未来战场需求、符合我国航空装备研制特色的腐蚀防控验证与评价体系提供参考。

Abstract

The work aims to systematically analyze the main development process and future direction of the verification methods for corrosion prevention and control of US military aviation equipment from modes, methods and technology, and propose suggestions for the verification work for corrosion prevention and control of Chinese aviation equipment. Firstly, three modes in the verification for corrosion prevention and control experienced by US military aviation equipment are reviewed and summarized, and the verification requirements, verification contents and main characteristics of different verification modes are analyzed. Secondly, the basic framework, design concepts, main advantages and related requirements of building-block verification for corrosion prevention and control are analyzed in combination with the latest requirements of verification for corrosion prevention and control of US military equipment and the latest revisions of the relevant technical content of MIL-STD-810H. Finally, the development trends, development priorities and technical characteristics of the verification technology for corrosion prevention and control of US military equipment are analyzed from two aspects: laboratory corrosion tests and digital verification by practical examples. Through a systematic review and comparative analysis of verification methods for corrosion prevention and control of US military aviation equipment, the inherent logic behind the evolution of corrosion prevention and control verification from a single test to a systematic verification throughout the entire life cycle is revealed. This insight can provide a reference for establishing a verification and evaluation system of corrosion prevention and control that meets the demands of the future battlefield and aligns with the development characteristics of Chinese aviation equipment.

导出引用

李明, 杨昭君, 张蕾, 邢朝君, 傅耘. 美军航空装备腐蚀防控验证方法跟踪研究[J]. 装备环境工程. 2026, 23(3): 1-9 https://doi.org/10.7643/issn.1672-9242.2026.03.001

LI Ming, YANG Zhaojun, ZHANG Lei, XING Zhaojun, FU Yun. Follow-up Study on Verification Methods for Corrosion Prevention and Control of US Military Aviation Equipment[J]. Equipment Environmental Engineering. 2026, 23(3): 1-9 https://doi.org/10.7643/issn.1672-9242.2026.03.001

中图分类号： V216.5

参考文献

[1] 祝耀昌, 张建军. 武器装备环境适应性要求、环境适应性验证要求和环境条件及其相互关系的讨论(二)[J]. 航天器环境工程, 2012(2): 119-122.
ZHU Y C, ZHANG J J.Discussion of Relationships among Environmental Worthiness Requirement, Verification Requirement of Environmental Worthiness and Environmental Conditions of Materiel (Part Two)[J]. Spacecraft Environment Engineering, 2012(2): 119-122.
[2] 祝耀昌, 张建军. 武器装备环境适应性要求、环境适应性验证要求和环境条件及其相互关系的讨论(二)[J]. 航天器环境工程, 2012(2): 119-122.
ZHU Y C, ZHANG J J.Discussion of Relationships among Environmental Worthiness Requirement, Verification Requirement of Environmental Worthiness and Environmental Conditions of Materiel (Part Two)[J]. Spacecraft Environment Engineering, 2012(2): 119-122.
[3] 张令波, 李明, 傅耘. 舰载机环境试验方法发展探讨[J]. 装备环境工程, 2015, 12(6): 100-103.
ZHANG L B, LI M, FU Y.Development of Environmental Test Methods for Carrier-Based Aircraft[J]. Equipment Environmental Engineering, 2015, 12(6): 100-103.
[4] 中国人民解放军总装备部. 军用装备实验室环境试验方法: GJB 150A—2009[S]. 北京: 中国标准出版社, 2009.
General Armaments Department of the People's Liberation Army. Laboratory Environmental Test Methods for Military Materiel: GJB 150A—2009[S]. Beijing: Standards Press of China, 2009.
[5] 傅耘, 史左敏, 李敏伟. 新体制下装备环境适应性试验鉴定的思考[J]. 装备环境工程, 2023, 20(5): 1-5.
FU Y, SHI Z M, LI M W.Thoughts on Materiel Environmental Worthiness Test and Evaluation in New System[J]. Equipment Environmental Engineering, 2023, 20(5): 1-5.
[6] 中国人民解放军总装备部. 装备环境工程通用要求: GJB 4239A—2022[S]. 北京: 中国标准出版社, 2022.
General Armaments Department of the People's Liberation Army. General Requirements for Materiel Environ mental Engineering: GJB 4239A—2022[S]. Beijing: Standards Press of China, 2022.
[7] 方志刚, 曹京宜, 冯亚菲, 等. 美国海军装备腐蚀预防与控制战略研究[J]. 中国材料进展, 2020, 39(3): 169-173.
FANG Z G, CAO J Y, FENG Y F, et al.The Strategy Research on Corrosion Prevention and Control of U.S. Navy Equipment[J]. Materials China, 2020, 39(3): 169-173.
[8] 牟子方, 魏汝祥, 袁昊劼, 等. 美军腐蚀防护与控制项目研究[J]. 情报杂志, 2017, 36(5): 37-41.
(MOU/MU) Z F, WEI R X, YUAN H J, et al. The Study of Corrosion Protection and Control Project Research of US Army[J]. Journal of Intelligence, 2017, 36(5): 37-41.
[9] DOD. Airworthiness Certification Criteria: MIL-HDBK- 516C NOT 1[S]. Washington: Department of Defense, 2014.
[10] SSPC/NACE. Corrosion Prevention and Control Planning: SSPC CPC-1/NACE SP21412-2020[S]. Washington: Department of Defense, 2020.
[11] Office of the under Secretary of Defense for Acquisition and Sustainment. Corrosion Prevention and Control Planning Guidebook for Military Systems and Equipment[R]. Washington: Department of Defense, 2022.
[12] DOD. Environmental Engineering Considerations and Laboratory Tests: MIL-STD-810H(1)[S]. Washington: Department of Defense, 2022.
[13] Army Materiel Command.Engineering Design Handbook Environmental Series, Part Four, Life cycle environments[R]. Springfield: US Department of Commerce National Technical Information Service, 1975.
[14] Principal Deputy under Secretary of Defense, Acquisitions, Tech and Logistics. Corrosion Prevention and Control Planning Guidebook[R]. Washington: Department of Defense, 2007.
[15] STEVEN R T.Building Block Approach to Simulated Structural Corrosion Testing[R]. Ohio: Air Force Research Laboratory, 2012.
[16] 王丽, 祝耀昌. 环境试验及其应用综述[J]. 环境技术, 1998(2): 6-9.
WANG L, ZHU Y C.Review of Environmental Test and Its Application[J]. Environmental Technology, 1998(2): 6-9.
[17] 傅耘, 张建军, 李明, 等. 关于环境工程数字化转型的思考[J]. 装备环境工程, 2024, 21(5): 13-23.
FU Y, ZHANG J J, LI M, et al.Reflections on Digital Transformation of Environmental[J]. Equipment Environmental Engineering, 2024, 21(5): 13-23.
[18] Standard Practice for Modified Salt Spray (Fog) Testing: ASTM G85-02[S]. ASTM International[astm], .
[19] 朱金阳, 李明, 程丛高. 美海军舰载航空装备“盐雾-SO₂” 试验方法发展历程及启示[J]. 装备环境工程, 2017, 14(3): 33-38.
ZHU J Y, LI M, CHENG C G.Development and Enlightenment of “Salt Spray-SO₂” Test Method for Carrier-Based Aircraft of US Navy[J]. Equipment Environmental Engineering, 2017, 14(3): 33-38.
[20] 贾润川, 李明, 朱蒙, 等. 两种实验室方法模拟舰载平台环境下航空电路板的腐蚀行为[J]. 海军航空大学学报, 2022, 37(6): 469-478.
JIA R C, LI M, ZHU M, et al.Two Laboratory Methods to Simulate the Corrosive Behavior of Aviation Circuit Boards in the Shipboard Platform Environment[J]. Journal of Naval Aviation University, 2022, 37(6): 469-478.
[21] 朱蒙, 李明, 陈宇, 等. 海洋大气环境下微动开关触点回跳时间增大故障的试验复现与分析[J]. 海军航空大学学报, 2022, 37(6): 462-468.
ZHU M, LI M, CHEN Y, et al.Test Recurrence and Analysis of the Fault with Increased Contact Bounce Time of Microswitches in Marine Atmospheric Environment[J]. Journal of Naval Aviation University, 2022, 37(6): 462-468.
[22] 李明, 朱金阳, 李刚, 等. 典型航空装备用金属材料在不同酸性盐雾环境下的腐蚀效应及机理[J]. 装备环境工程, 2019, 16(4): 38-45.
LI M, ZHU J Y, LI G, et al.Corrosion Performance and Mechanism of Typical Aviation Metal Materials under Different Acid Salt Spray Test Environments[J]. Equipment Environmental Engineering, 2019, 16(4): 38-45.
[23] JAMES F D.Accelerated Corrosion Test Method Development[R]. San Antonio: Southwest Research Institute, 2018.
[24] Douglas C.Hansen. Dynamic Multivariate Accelerated Corrosion Test Protocol[R]. Dayton: University of Dayton Research Institute, 2014.
[25] DAVID H R, DOUGLAS C H N, SCOTT J M. A Cumulative Damage Approach to Predicting the Atmospheric Corrosion Rate of 1010 Steel[C]// DoD Corrosion Conference. Washington: DoD, 2013.
[26] 魏金钟, 曾文. 数字新基建, 运营模式以“数字航空”推进航空工业数字化转型, 实现高质量发展[N]. 中国航空报, 2023-11-17(3906).
WEI J Z, ZENG W. New Digital Infrastructure and Operation Model,Promote the Digital Transformation of the Aviation Industry with “Digital Aviation” and Achieve High-Quality Development[N]. China Aviation News, 2023-11-17(3906).
[27] 苏多, 柳鑫. 数字孪生驱动下的装备适航性和安全性设计与验证技术研究[J]. 航空科学技术, 2021, 32(11): 23-33.
SU D, LIU X.Research on Design and Verification Technology of Equipment Airworthiness and Safety Driven by Digital Twins[J]. Aeronautical Science & Technology, 2021, 32(11): 23-33.
[28] 任占勇. 数字线索与数字孪生助力航空装备可靠性的提升[N]. 中国航空报, 2017-12-28(3).
REN Z Y. Digital Thread and Digital Twin Help Improve the Reliability of Aviation Equipment[N]. China Aviation News, 2017-12-28(3).
[29] 卫旭芳, 刘彬. 美军数字工程建设发展研究及启示[J]. 航空兵器, 2023, 30(3): 56-66.
WEI X F, LIU B.Research on the Development of US Military Digital Engineering and Its Enlightenment[J]. Aero Weaponry, 2023, 30(3): 56-66.
[30] 魏薪, 董超芳, 徐奥妮, 等. 金属腐蚀的多尺度计算模拟研究进展[J]. 中国材料进展, 2018, 37(1): 1-8.
WEI X, DONG C F, XU A N, et al.Progress in Multi-Scale Calculation and Simulation of Metal Corrosion[J]. Materials China, 2018, 37(1): 1-8.
[31] 吴海鹏, 王正曦, 梁钊源, 等. 数值模拟在金属腐蚀与防护领域的应用研究现状[J]. 重庆理工大学学报(自然科学版), 2018, 32(3): 142-148.
WU H P, WANG Z X, LIANG Z Y, et al.Literature Review on Application of Numerical Simulation in Corrosion and Protection of Metallic Materials[J]. Journal of Chongqing Institute of Technology, 2018, 32(3): 142-148.
[32] NICKERSON W C, IYYER N, LEGG K, et al.Modeling Galvanic Coupling and Localized Damage Initiation in Airframe Structures[J]. Corrosion Reviews, 2017, 35(4/5): 205-223.
[33] MUKHERJEE S, ZHOU B, DASGUPTA A, et al.Multiscale Modeling of the Anisotropic Transient Creep Response of Heterogeneous Single Crystal SnAgCu Solder[J]. International Journal of Plasticity, 2016, 78: 1-25.
[34] VAN DEN STEEN N, SIMILLION H, DOLGIKH O, et al. An Integrated Modeling Approach for Atmospheric Corrosion in Presence of a Varying Electrolyte Film[J]. Electrochimica Acta, 2016, 187: 714-723.
[35] TUEGEL E J, INGRAFFEA A R, EASON T G, et al.Reengineering Aircraft Structural Life Prediction Using a Digital Twin[J]. International Journal of Aerospace Engineering, 2011, 2011(1): 154798.
[36] MICHAEL G V.Geometrically Explicit Finite Element Modeling of AA 7075-T651 Microstructure with Fatigue Cracks[D]. New York: Cornell University, 2011.
[37] NICKERSON W C, AMIRI M, IYYER N.Building Environmental History for Naval Aircraft[J]. Corrosion Reviews, 2019, 37(5): 367-375.