Effects of Typical Environmental Factors on Properties of Bulletproof Fiber Composites and Their Modification

LIAO Yunjiao; CHENG Shiyu; TANG Rujun; HUANG Anwei; CONG Dalong; SONG Kaiqiang; GUO Feng; NIE Jiaxing; LI Peng; JIANG Yiwei

doi:10.7643/issn.1672-9242.2026.03.016

PDF(5105 KB)

Equipment Environmental Engineering ›› 2026, Vol. 23 ›› Issue (3) : 148-162. DOI: 10.7643/issn.1672-9242.2026.03.016

Special Issue—Equipment Service Environment and Performance Testing

Effects of Typical Environmental Factors on Properties of Bulletproof Fiber Composites and Their Modification

LIAO Yunjiao¹, CHENG Shiyu^1,*, TANG Rujun², HUANG Anwei¹, CONG Dalong¹, SONG Kaiqiang¹, GUO Feng¹, NIE Jiaxing¹, LI Peng¹, JIANG Yiwei¹

Author information +

History +

Abstract

The work aims to review the research progress of the effects of typical environmental factors on the properties of fiber composites in the field of ballistic protection. Focusing on the actual use of fiber materials in bulletproof applications, the effect mechanism of different environmental conditions on their protective properties was analyzed. Aiming at the performance degradation of fibers during service, the corresponding modification methods and enhancement strategies were discussed in detail. Then, the degradation law and failure mechanism of fiber composites under typical environmental factors such as hygrothermal, ultraviolet, acid and salt spray were systematically reviewed, to provide theoretical basis for the selection and application of fiber composites in the bulletproof field and offer direction reference for the modification research of improving the environmental adaptability of fiber composites.

Key words

fiber composites / bulletproof protection / environmental adaptability / polymer materials / material aging / fiber modification

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

LIAO Yunjiao, CHENG Shiyu, TANG Rujun, HUANG Anwei, CONG Dalong, SONG Kaiqiang, GUO Feng, NIE Jiaxing, LI Peng, JIANG Yiwei. Effects of Typical Environmental Factors on Properties of Bulletproof Fiber Composites and Their Modification[J]. Equipment Environmental Engineering. 2026, 23(3): 148-162 https://doi.org/10.7643/issn.1672-9242.2026.03.016

References

[1] NAIK N K, SHRIRAO P, REDDY B C K. Ballistic Impact Behaviour of Woven Fabric Composites: Formulation[J]. International Journal of Impact Engineering, 2006, 32(9): 1521-1552.
[2] SONG B, PARK H, LU W Y, et al.Transverse Impact Response of a Linear Elastic Ballistic Fiber Yarn[J]. Journal of Applied Mechanics, 2011, 78(5): 051023.
[3] LAIBLE R.Ballistic Materials and Penetration Mechanics[M]. Amsterdam: Elsevier, 1980.
[4] TASDEMIRCI A, HALL I W.The Effects of Plastic Deformation on Stress Wave Propagation in Multi-Layer Materials[J]. International Journal of Impact Engineering, 2007, 34(11): 1797-1813.
[5] ZHANG D T, SUN Y, CHEN L, et al.Influence of Fabric Structure and Thickness on the Ballistic Impact Behavior of Ultrahigh Molecular Weight Polyethylene Composite Laminate[J]. Materials & Design (1980-2015), 2014, 54: 315-322.
[6] WANG X, WANG W, PENG G, et al.Analysis of the Ballistic Performance and Mechanism of Soft Bulletproof Layers under the Impact of Multiple Lead Core Bullets[J]. Journal of Physics: Conference Series, 2023, 2460(1): 012082.
[7] SHENG X Z, QIN J B, WANG T W, et al.Properties of Kevlar Fabric Composites Reinforced by STF Composed of Monodisperse Polystyrene Microspheres[J]. Thin- Walled Structures, 2021, 167: 108238.
[8] ZHANG X Y, LI T T, WANG Z K, et al.Facile Fabrication and Mass Production of TPU/Silica/STF Coated Aramid Fabric with Excellent Flexibility and Quasi-Static Stab Resistance for Versatile Protection[J]. Progress in Organic Coatings, 2021, 151: 106088.
[9] 杜春林, 曹俊超, 白杨, 等. 复合材料和金属防护结构抗弹性能快速等效方法[J/OL]. 复合材料学报, 2025, 44(0): 1-12. (2025-06-10) [2025-08-19]. https://doi.org/10.13801/j.cnki.fhclxb.20250818.001.
DU C L, CAO J C, BAI Y, et al. Fast Equivalent Method of Anti-Elastic Properties of Composite Materials and Metal Protective Structures[J]. Journal of Composite Materials, 2025, 44(0): 1-12. (2025-06-10) [2025-08-19]. https://doi.org/10.13801/j.cnki.fhclxb.20250818.001.
[10] ROYLANCE D, WILDE A, TOCCI G.Ballistic Impact of Textile Structures[J]. Textile Research Journal, 1973, 43(1): 34-41.
[11] SMITH J C, MCCRACKIN F L, SCHIEFER H F.Stress- Strain Relationships in Yarns Subjected to Rapid Impact Loading: 5. Wave Propagation in Long Textile Yarns Impacted Transversely[J]. Journal of Research of the National Bureau of Standards, 1958, 60(5): 517.
[12] CUNNIFF P M.An Analysis of the System Effects in Woven Fabrics under Ballistic Impact[J]. Textile Research Journal, 1992, 62(9): 495-509.
[13] 曹俊超, 孙建波, 曹勇, 等. 混杂纤维增强环氧树脂复合材料高速冲击损伤行为[J]. 复合材料学报, 2022, 39(10): 4935-4948.
CAO J C, SUN J B, CAO Y, et al.High-Velocity Impact Damage Behavior of Hybrid Fiber Reinforced Epoxy Composites[J]. Acta Materiae Compositae Sinica, 2022, 39(10): 4935-4948.
[14] 薛赛楠. 树脂整理对防弹靶板冲击响应的影响研究[D]. 郑州: 中原工学院, 2022.
XUE S N.Study on the Influence of Resin Finishing on the Impact Response of Bulletproof Target[D]. Zhengzhou: Zhongyuan University of Technology, 2022.
[15] YANG Y F, LIU Y C, XUE S N, et al.Multi-Scale Finite Element Modeling of Ballistic Impact Onto Woven Fabric Involving Fiber Bundles[J]. Composite Structures, 2021, 267: 113856.
[16] 王怀颖, 彭涛, 王煦怡. 芳纶Ⅲ材料在防弹装备领域的应用[J]. 警察技术, 2017(1): 63-71.
WANG H Y, PENG T, WANG X Y.Application of Aramid Ⅲ Material in Bulletproof Equipment Field[J]. Police Technology, 2017(1): 63-71.
[17] 刘克杰, 高虹, 黄继庆, 等. 芳纶Ⅲ与芳纶Ⅱ防弹性能研究[J]. 高科技纤维与应用, 2014, 39(1): 40-44.
LIU K J, GAO H, HUANG J Q, et al.Study on Bulletproof Performances of Aramid Ⅲ and Aramid Ⅱ[J]. Hi-Tech Fiber & Application, 2014, 39(1): 40-44.
[18] 王东东, 管海新, 王强, 等. 一种轻质复合防护装甲: CN112229272A[P].2021-01-15.
WANG D D, GUAN H X, WANG Q, et al. A Kind of Lightweight Composite Protectivearmor: CN112229272A[P].2021-01-15.
[19] 田志鹏, 宋方, 钟成. 一种直升机集成装甲地板: CN111361722A[P].2020-07-03.
[20] 张岩, 徐兴亚, 郭雁, 等. 高性能纤维增强抗弹复合材料的研究与应用进展[J]. 工程塑料应用, 2024, 52(8): 190-196.
ZHANG Y, XU X Y, GUO Y, et al.Research and Application Progress of High Performance Fiber Reinforced Ballistic Composites[J]. Engineering Plastics Application, 2024, 52(8): 190-196.
[21] SHERIF SAMIR N, RADWAN M A, SADEK M A, et al.Preparation and Characterization of Bullet-Proof Vests Based on Polyamide Fibers[J]. International Journal of Engineering & Technology, 2018, 7(3): 1290.
[22] PATEL K, CHIKKALI S H, SIVARAM S.Ultrahigh Molecular Weight Polyethylene: Catalysis, Structure, Properties, Processing and Applications[J]. Progress in Polymer Science, 2020, 109: 101290.
[23] 董彬, 魏汝斌, 王小伟, 等. 高性能有机纤维在防弹复合材料领域应用研究现状[J]. 复合材料科学与工程, 2023(1): 116-123.
DONG B, WEI R B, WANG X W, et al.Review of High Performance Organic Fibers in Ballistic Composite Fields[J]. Composites Science and Engineering, 2023(1): 116-123.
[24] 孟花, 张燕, 刘永佳, 等. 高性能防弹防刺材料研究进展[J]. 纺织科技进展, 2024, 46(8): 13-16.
MENG H, ZHANG Y, LIU Y J, et al.Research Progress in High-Performance Bulletproof and Stab Proof Materials[J]. Progress in Textile Science & Technology, 2024, 46(8): 13-16.
[25] HEARLE J W S. High-Performance Fiber[M]. Cambridge: Wood head Publishing Limited, 2001: 62-92.
[26] MAWKHLIENG U, MAJUMDAR A, LAHA A.A Review of Fibrous Materials for Soft Body Armour Applications[J]. RSC Advances, 2020, 10(2): 1066-1086.
[27] 王宁, 夏兆鹏, 王亮, 等. PBO纤维抗紫外老化改性研究进展[J]. 纺织导报, 2021(5): 54-58.
WANG N, XIA Z P, WANG L, et al.Research Progress of UV Aging Resistance Modification of PBO Fiber[J]. China Textile Leader, 2021(5): 54-58.
[28] TANG L, HU Q Y, LI L Z, et al.Properties of Poly (p-phenylene benzobisoxazole) Fiber, and Advances in Its Surface Modification to Enhance Fiber-Matrix Adhesion: A Review[J]. Polymer Composites, 2025, 46(8): 6793-6812.
[29] HOLMES G A, RICE K, SNYDER C R.Ballistic Fibers: A Review of the Thermal, Ultraviolet and Hydrolytic Stability of the Benzoxazole Ring Structure[J]. Journal of Materials Science, 2006, 41(13): 4105-4116.
[30] 杨超杰, 吴喜娜, 魏浩, 等. PBO纤维表面改性处理的研究进展[J]. 表面技术, 2024, 53(1): 48-55.
YANG C J, WU X N, WEI H, et al.Research Progress on Surface Modification of PBO Fiber[J]. Surface Technology, 2024, 53(1): 48-55.
[31] DHARANI KUMAR S, NITIN M S, KUMAR S S, et al.Mechanical and Ballistic Performance of Individual and Synergistic Filler Reinforced Glass Fiber Epoxy Composites[J]. Polymer Composites, 2025, 46(8): 7555-7568.
[32] KULHAN T, KAMBOJ A, GUPTA N K, et al.Fabrication Methods of Glass Fibre Composites—A Review[J]. Functional Composites and Structures, 2022, 4(2): 022001.
[33] JULL E I L, DEKKER R, AMARAL L. Impact of Adhesive Layer Properties on Ceramic Multi-Layered Ballistic Armour Systems: A Review[J]. Defence Technology, 2025, 47: 292-303.
[34] BHAGIRATH JADHAV A, GAIKWAD A, GORI Y, et al.A Review of Armour's Use of Composite Materials[J]. Materials Today: Proceedings, 2023, 9: 167.
[35] 王海雷, 段跃新, 王维维, 等. 玻璃纤维与碳纤维混杂复合材料的拉伸及低速冲击性能研究[J]. 复合材料科学与工程, 2021(2): 102-109.
WANG H L, DUAN Y X, WANG W W, et al.Study on Tensile and Low Velocity Impact Performance of Glass and Carbon Fibers Hybrid Composites[J]. Composites Science and Engineering, 2021(2): 102-109.
[36] 武一丁, 王晓东, 余毅磊, 等. 纤维背板结构对B₄C陶瓷复合装甲抗侵彻破碎特性的影响[J]. 爆炸与冲击, 2023, 43(9): 179-191.
WU Y D, WANG X D, YU Y L, et al.Affection of Fiber Backboard Structure on the Penetration and Crushing Resistance of B₄C Ceramic Composite Armor[J]. Explosion and Shock Waves, 2023, 43(9): 179-191.
[37] 陆文成, 武一丁, 余毅磊, 等. 不同厚度比的SiC陶瓷-纤维增强树脂基复合材料装甲的损伤失效及其抗弹性能[J]. 复合材料学报, 2025, 42(2): 1125-1139.
LU W C, WU Y D, YU Y L, et al.Damage Failure and Ballistic Performance of SiC Ceramic-Fiber Reinforced Resin-Based Composite Armor with Different Thickness Ratios[J]. Acta Materiae Compositae Sinica, 2025, 42(2): 1125-1139.
[38] BAO J W, WANG Y W, AN R, et al.Investigation of the Mechanical and Ballistic Properties of Hybrid Carbon/ Aramid Woven Laminates[J]. Defence Technology, 2022, 18(10): 1822-1833.
[39] 王东哲, 秦溶蔓, 孙娜, 等. 陶瓷/纤维复合装甲抗弹丸侵彻性能的试验与数值模拟研究[J]. 材料导报, 2021, 35(18): 18216-18221.
WANG D Z, QIN R M, SUN N, et al.Experimental and Numerical Simulation Study on Anti-Projectile Penetration Performance of Ceramic/Fiber Composite Armor[J]. Materials Review, 2021, 35(18): 18216-18221.
[40] ROBERT M, ROY R, BENMOKRANE B.Environmental Effects on Glass Fiber Reinforced Polypropylene Thermoplastic Composite Laminate for Structural Applications[J]. Polymer Composites, 2010, 31(4): 604-611.
[41] ADAMSON M J.Thermal Expansion and Swelling of Cured Epoxy Resin Used in Graphite/Epoxy Composite Materials[J]. Journal of Materials Science, 1980, 15(7): 1736-1745.
[42] 高超干. 树脂基复合材料的吸湿和多种环境下的老化规律研究[D]. 南京: 南京航空航天大学, 2020.
GAO C G.Research on Moisture Diffusion and Multiple Environment Ageing Behavior of Fiber Reinforced Polymer Composite[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2020.
[43] FORSTER A L, FORSTER A M, CHIN J W, et al.Long-Term Stability of UHMWPE Fibers[J]. Polymer Degradation and Stability, 2015, 114: 45-51.
[44] CHOUHAN H, BHALLA N A, BHATNAGAR N.High Strain Rate Performance of UHMWPE Composites: Effect of Moisture Ingress and Egress[J]. Materials Today Communications, 2021, 26: 101709.
[45] 王梅, 李晖. 超高分子量聚乙烯防弹材料在人工老化条件下的抗弹性能研究[J]. 警察技术, 2011(2): 8-11.
WANG M, LI H.Study on the Anti-Elastic Properties of Ultra-High Molecular Weight Polyethylene Bulletproof Materials under Artificial Aging Conditions[J]. Police Technology, 2011(2): 8-11.
[46] 贾储源, 苑成策, 董继东, 等. 芳纶纤维湿热老化的试验研究与量子化学模拟[J]. 化学与粘合, 2020, 42(5): 313-317.
JIA C Y, YUAN C C, DONG J D, et al.Experimental Study and Quantum Chemical Simulation of the Hydrothermal Aging of Aramid Fiber[J]. Chemistry and Adhesion, 2020, 42(5): 313-317.
[47] 李强, 张小伟, 王成, 等. 环境因素叠加对国产芳纶头盔防弹性能的影响[J]. 工程塑料应用, 2025, 53(1): 133-139.
LI Q, ZHANG X W, WANG C, et al.Effect of Superposition of Environmental Factors on Bulletproof Performance of Domestic Aramid Helmet[J]. Engineering Plastics Application, 2025, 53(1): 133-139.
[48] 蔡敬刚, 王司佳. 对位芳纶织物耐温性能研究[J]. 产业用纺织品, 2016, 34(7): 11-13.
CAI J G, WANG S J.Study on Thermal Performance of Para-Aramid Fabric[J]. Technical Textiles, 2016, 34(7): 11-13.
[49] ISLAM M S, MELENDEZ-SOTO E, CASTELLANOS A G, et al.Investigation of Woven Composites as Potential Cryogenic Tank Materials[J]. Cryogenics, 2015, 72: 82-89.
[50] CHEN J S, YANG G W, XIAO S, et al.Effect of Temperature and Moisture Composite Environments on the Mechanical Properties and Mechanisms of Woven Carbon Fiber Composites[J]. Polymer Composites, 2024, 45(5): 4618-4635.
[51] GUERMAZI N, BEN TARJEM A, KSOURI I, et al.On the Durability of FRP Composites for Aircraft Structures in Hygrothermal Conditioning[J]. Composites Part B: Engineering, 2016, 85: 294-304.
[52] 顾习峰, 杨勇新, 胡海涛, 等. 湿热环境下玄武岩纤维片材耐久性能试验研究[C]// 第十八届玻璃钢/复合材料学术年会论文集. 北京: 中国硅酸盐学会, 2010.
GU X F, YANG Y G, HU H T, et al.Experimental Study on Durability of Basalt Fiber Sheets under Hygrothermal Environment[C]// Proceedings of 18th Annual Conference on FRP/Composites. Beijing: The Chinese Ceramic Society, 2010.
[53] 胡高强, 夏兆鹏, 张海宝, 等. 不同负荷下UHMWPE纤维的热老化性能及其机理研究[J]. 产业用纺织品, 2022, 40(2): 22-28.
HU G Q, XIA Z P, ZHANG H B, et al.Thermal Aging Properties and Mechanism of UHMWP E Fibers under Different Loads[J]. Technical Textiles, 2022, 40(2): 22-28.
[54] 孙欣蕾, 曹京宜, 殷文昌, 等. 高温高湿环境下玻璃纤维增强乙烯基酯复合材料的失效行为研究[J]. 中国腐蚀与防护学报, 2025, 45(6): 1679-1688.
SUN X L, CAO J Y, YIN W C, et al.Failure Behavior of Vinyl Ester Composites in High Temperature and High Humidity Environments[J]. Journal of Chinese Society for Corrosion and Protection, 2025, 45(6): 1679-1688.
[55] LUO J J, ZHANG M Y, NIE J Y, et al.A Deep Insight into the Structure and Performance Evolution of Aramid Nanofiber Films Induced by UV Irradiation[J]. Polymer Degradation and Stability, 2019, 167: 170-178.
[56] GHOSH L, FADHILAH M H, KINOSHITA H, et al.Synergistic Effect of Hyperthermal Atomic Oxygen Beam and Vacuum Ultraviolet Radiation Exposures on the Mechanical Degradation of High-Modulus Aramid Fibers[J]. Polymer, 2006, 47(19): 6836-6842.
[57] NASCIMENTO R F, DA SILVA A O, WEBER R P, et al. Influence of UV Radiation and Moisten Associated with Natural Weathering on the Ballistic Performance of Aramid Fabric Armor[J]. Journal of Materials Research and Technology, 2020, 9(5): 10334-10345.
[58] 张华鹏. 防弹材料冲击破坏机理及其纤维的衰减规律[D]. 上海: 东华大学, 2002.
ZHANG H P.Failure Mechanisms of Ballistic Resistant Material and Decay of Its Fibers[D]. Shanghai: Donghua University, 2002.
[59] 乔琨, 朱波, 高学平, 等. 紫外老化对碳纤维增强环氧树脂复合材料性能的影响[J]. 功能材料, 2012, 43(21): 2989-2992.
QIAO K, ZHU B, GAO X P, et al.Influence of Artificial Accelerating UV Aging on Carbon Fiber Reinforced Epoxy Composite[J]. Journal of Functional Materials, 2012, 43(21): 2989-2992.
[60] DE ALMEIDA SANTOS DA SILVA G, D’ALMEIDA J R M, CARDOSO D C T. Investigation on Moisture Absorption Behavior on GFRP and Neat Epoxy Systems in Hygrothermal Salt Fog Aging[J]. Composites Part B: Engineering, 2024, 272: 111214.
[61] 胡峰铨. 高性能防弹材料老化与防弹性能研究[D]. 成都: 电子科技大学, 2024.
HU F Q.Study on Aging and Bulletproof Performance of High Performance Bulletproof Materials[D]. Chengdu: University of Electronic Science and Technology of China, 2024.
[62] ZHAO J.Effect of Surface Treatment on the Structure and Properties of Para-Aramid Fibers by Phosphoric Acid[J]. Fibers and Polymers, 2013, 14(1): 59-64.
[63] LIN L T, SHEN Y P, ZHANG Q P.Analysis of Environmental Impact on Mechanical Properties of Aramid Filaments[J]. Journal of Industrial Textiles, 2013, 42(4): 489-500.
[64] DEROMBISE G, VOUYOVITCH VAN SCHOORS L, DAVIES P. Degradation of Technora Aramid Fibres in Alkaline and Neutral Environments[J]. Polymer Degradation and Stability, 2009, 94(10): 1615-1620.
[65] REN Y, DING Z R, WANG C X, et al.Influence of DBD Plasma Pretreatment on the Deposition of Chitosan Onto UHMWPE Fiber Surfaces for Improvement of Adhesion and Dyeing Properties[J]. Applied Surface Science, 2017, 396: 1571-1579.
[66] REN Y, ZHANG Y, WANG X N, et al.Surface Properties and Adhesion Force of Air Dielectricbarrier Discharge Treated UHMWPE Fibers[J]. Acta Polymerica Sinica, 2016(10): 1439-1446.
[67] MATHAD R D, HARISH KUMAR H G, SANNAKKI B, et al. Electron-Beam-Induced Changes in Ultra-High- Molecular Weight Polyethylene[J]. Radiation Effects and Defects in Solids, 2010, 165(4): 277-289.
[68] WU M J, JIA L X, CHEN Z H, et al.Synergetic Enhancement of Interfacial Properties and Impact Resistant of UHMWPE Fiber Reinforced Composites by Oxygen Plasma Modification[J]. Composite Structures, 2022, 292: 115663.
[69] CHEN J R, ZHU Y F, NI Q Q, et al.Surface Modification and Characterization of Aramid Fibers with Hybrid Coating[J]. Applied Surface Science, 2014, 321: 103-108.
[70] CHEN J R, LI X X, ZHU Y F, et al.Storable Silicon/Shape Memory Polyurethane Hybrid Sols Prepared by a Facile Synthesis Process and Their Application to Aramid Fibers[J]. Journal of Sol-Gel Science and Technology, 2015, 74(3): 670-676.
[71] 岳航宇, 韩飞龙, 张亚, 等. 聚多巴胺和SiO₂界面改性对芳纶/聚氨酯复合材料防弹性能的影响[J]. 高分子学报, 2024, 55(10): 1365-1380.
YUE H Y, HAN F L, ZHANG Y, et al.The Effect of Interfacial Modification of Polydopamine and Silicane on Ballistic Performance of Aramid/Polyurethane Composites[J]. Acta Polymerica Sinica, 2024, 55(10): 1365-1380.
[72] CHEN F X, ZHAI L S, YANG H Y, et al.Unparalleled Armour for Aramid Fiber with Excellent UV Resistance in Extreme Environment[J]. Advanced Science, 2021, 8(12): 2004171.
[73] ZHAI L S, HUANG Z Y, LUO Y X, et al.Decorating Aramid Fibers with Chemically-Bonded Amorphous TiO₂ for Improving UV Resistance in the Simulated Extreme Environment[J]. Chemical Engineering Journal, 2022, 440: 135724.
[74] ZHU X L, YUAN L, LIANG G Z, et al.Unique Surface Modified Aramid Fibers with Improved Flame Retardancy, Tensile Properties, Surface Activity and UV-Resistance through in situ Formation of Hyperbranched Polysiloxane-Ce_0.8Ca_0.2O_1.8 Hybrids[J]. Journal of Materials Chemistry A, 2015, 3(23): 12515-12529.
[75] ZHU J J, YUAN L, GUAN Q B, et al.A Novel Strategy of Fabricating High Performance UV-Resistant Aramid Fibers with Simultaneously Improved Surface Activity, Thermal and Mechanical Properties through Building Polydopamine and Graphene Oxide Bi-Layer Coatings[J]. Chemical Engineering Journal, 2017, 310: 134-147.
[76] 宋波. PBO纤维表面耐紫外涂层的制备及其光老化性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2013.
SONG B.Preparation and Photoaging Performance Research of UV Coating on PBO Fibers Surface[D]. Harbin: Harbin Institute of Technology, 2013.
[77] XU Y J, ZHANG H, HUANG G Y.Review on the Mechanical Deterioration Mechanism of Aramid Fabric under Harsh Environmental Conditions[J]. Polymer Testing, 2023, 128: 108227.
[78] LI N, WU Z Q, YANG X X, et al.One-Pot Strategy for Covalent Construction of POSS-Modified Silane Layer on Carbon Fiber to Enhance Interfacial Properties and Anti-Hydrothermal Aging Behaviors of PPBES Composites[J]. Journal of Materials Science, 2018, 53(24): 16303-16317.
[79] ZHANG H R, LIANG G Z, GU A J, et al.Facile Preparation of Hyperbranched Polysiloxane-Grafted Aramid Fibers with Simultaneously Improved UV Resistance, Surface Activity, and Thermal and Mechanical Properties[J]. Industrial & Engineering Chemistry Research, 2014, 53(7): 2684-2696.
[80] MA L X, ZHANG J W, TENG C Q.Covalent Functionalization of Aramid Fibers with Zinc Oxide Nano-Interphase for Improved UV Resistance and Interfacial Strength in Composites[J]. Composites Science and Technology, 2020, 188: 107996.
[81] LI C, ZHANG L W, WANG H Y, et al.Study of Hygrothermal Aging for Basalt Fiber/Epoxy Resin Composites Modified with CeCl₃[J]. Polymers, 2024, 16(6): 819.
[82] GLASKOVA-KUZMINA T, PINTO R, ZUKIENE K, et al.Hydrothermal Aging of Basalt Fiber-Reinforced Epoxy Composites Modified with Star-Like Polymer[J]. Polymer Composites, 2026, 47(3): 2666-2677.