罗勇,何建新,赵全成,张凯,周堃.某型导弹橡胶密封件剩余贮存寿命预测[J].装备环境工程,2014,11(4):12-15. LUO Yong,HE Jian-xin,ZHAO Quan-cheng,ZHANG Kai,ZHOU Kun.Prediction of Remaining Shelf-life for a Missile Rubber Sealing Material[J].Equipment Environmental Engineering,2014,11(4):12-15. |
某型导弹橡胶密封件剩余贮存寿命预测 |
Prediction of Remaining Shelf-life for a Missile Rubber Sealing Material |
投稿时间:2014-06-30 修订日期:2014-07-08 |
DOI:10.7643/issn.1672-9242.2014.04.003 |
中文关键词: 密封件 热氧老化 剩余贮存寿命 |
英文关键词:sealing material thermal aging remaining shelf-life |
基金项目: |
|
Author | Institution |
LUO Yong | Southwest Research Institute of Technology and Engineering, Chongqing 400039, China |
HE Jian-xin | Southwest Research Institute of Technology and Engineering, Chongqing 400039, China |
ZHAO Quan-cheng | Southwest Research Institute of Technology and Engineering, Chongqing 400039, China |
ZHANG Kai | Southwest Research Institute of Technology and Engineering, Chongqing 400039, China |
ZHOU Kun | Southwest Research Institute of Technology and Engineering, Chongqing 400039, China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 评估预测某型进口导弹的橡胶密封件剩余贮存寿命。 方法 通过质谱、红外光谱和能谱等理化分析方法确定橡胶密封件主体材质,通过热重分析确定热老化试验温度条件,设计压缩工装模拟弹体实际密封结构,开展 4 个温度条件下的加速热老化试验。 结果 材质分析确定橡胶密封件为丁苯橡胶,热老化试验获取了该材料在贮存温度下的压缩永久变形与贮存时间的老化动力学方程。 结论 25 ℃ 条件下该橡胶密封件的剩余贮存寿命为 5 . 8 年。 |
英文摘要: |
Objective To predict the remaining shelf-life for a missile rubber sealing material based on the thermal aging method. Methods The rubber material was analyzed by MS, FTIR, EDS, and XRD, the temperature conditions were determined through thermogravimetric analysis, and clamp setting was designed to simulate the actual sealing structure of the missile, to conduct the accelerated thermal aging under four temperature conditions. Results The rubber material was styrene butadiene rubber, and the aging dynamics equation of permanent compressive deformation and storage time at the storage temperature of this material was established. Conclusion The remaining shelf-life was predicted to be 5. 8 a at 25 ℃ . |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|