| 郭强,杨艳芹.不锈钢在聚甲醛装置模拟介质中的腐蚀行为[J].装备环境工程,2014,11(4):98-101,130. GUO Qiang,YANG Yan-qin.Corrosion Behaviors of Stainless Steels in Simulated Poly Formaldehyde Unit Solution[J].Equipment Environmental Engineering,2014,11(4):98-101,130. |
| 不锈钢在聚甲醛装置模拟介质中的腐蚀行为 |
| Corrosion Behaviors of Stainless Steels in Simulated Poly Formaldehyde Unit Solution |
| 投稿时间：2014-05-04 修订日期：2014-05-26 |
| DOI：10.7643/issn.1672-9242.2014.04.019 |
| 中文关键词: 聚甲醛装置 不锈钢 腐蚀 |
| 英文关键词:poly formaldehyde unit stainless steel corrosion |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 筛选更为先进的聚甲醛装置升级改造用钢,研究 316 L,904 L 和 2507 不锈钢在聚甲醛装置模拟介质中的腐蚀行为。 方法 在模拟介质中对这三种不锈钢进行全浸试验,利用动电位极化技术测定它们的点蚀电位,并?臁⒎治龈葱蚊埠透床铩?结果 模拟介质中,316 L 不锈钢发生点腐蚀和成分选择性腐蚀, 腐 蚀 产 物 主 要 为 Fe-Cr 铁 素 体 相 和 Fe2O3 赤 铁 矿 相。 结论 904 L 不锈钢的腐蚀速率和点蚀敏感性均明显优于 316 L 不锈钢,选用 904 L 不锈钢将有助于提升聚甲醛装置的耐腐蚀性能。 |
| 英文摘要: |
| Objective Corrosion behaviors of 316L, 904L and 2507 stainless steels were studied in the simulated poly formaldehyde unit solution, in order to select a more advanced steel for the upgrade of poly formaldehyde unit. Methods Immersion tests were performed for the three types of steel in the simulated solution, pitting potential was measured using the potentiodynamic polarization technique, and the morphology and the phase of the corrosion layer were observed and analyzed. Results Pitting corrosion and selective phase corrosion of 316L stainless steel occurred in the simulated solution, and the corrosion products were mainly Fe-Cr ferritic phase and Fe2O3 hematite phase. Conclusion The results showed that owing to the lower corrosion rate and sensitization on pitting corrosion than 316L stainless steel, 904L stainless steel is expected to improve the corrosion resistance of the poly formaldehyde unit. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
