刘元海,张幸.舰载机载设备腐蚀环境适应性要求的剪裁[J].装备环境工程,2016,13(5):61-67. 刘元海,张幸.Tailoring of Corrosion Environmental Adaptability Requirement for the Shipboard Airborne Equipments[J].Equipment Environmental Engineering,2016,13(5):61-67. |
舰载机载设备腐蚀环境适应性要求的剪裁 |
Tailoring of Corrosion Environmental Adaptability Requirement for the Shipboard Airborne Equipments |
投稿时间:2016-01-22 修订日期:2016-08-21 |
DOI:10.7643/ issn.1672-9242.2016.05.010 |
中文关键词: 舰载机 机载设备 环境适应性 剪裁要求 |
英文关键词:Shipboard Shipborne equipments Environmental adaptability Tailoring requirements |
基金项目: |
|
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 构建一套新的更高要求的舰载机载设备腐蚀环境适应性考核与评价指标。方法 在满足GJB 150.A-2009 基本试验条件(指标)的基础上,参考相关标准规范,遵循“环境分区原则”和“优先使用实测强度原则”进行剪裁。结果 获得了舰载机内部封闭、内部半封闭和敞开/外露三类不同环境区域安装的机载设备的湿热、霉菌、盐雾、酸性大气试验考核指标。结论 试验指标剪裁依据充分,适用于舰载机机载设备及其附件的腐蚀环境适应性评估与验证。 |
英文摘要: |
ABSTRACT: Objective To build a high-level corrosion environmental adaptability evaluation method of the shipboard airborne equipments. Methods Based on the requirements of GJB 150.A-2009 and related specifications, it was tailored by principles of “environmental zoning” and “real tesed intensity priority” on the referencing related specifications. Results The evaluation indexs for airborne equipments which installated in different environmental zones were obtained, including damp-heat, mildew, salt spray and acid atmosphere. Conclusion The tailoring method is reasonable and scientific, which is suitable for evaluating and validating environmental adaptability requirements of shipboard airborne equipments. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |