张伟,尹鹏飞,张有慧,刘福国,张国庆,韩冰,李向阳,王庆璋.海洋工程用新型牺牲阳极设计与性能研究(Ⅰ)——小尺寸阳极静态海水试验研究[J].装备环境工程,2016,13(2):63-70. ZHANG Wei,YIN Peng-fei,ZHANG You-hui,LIU Fu-guo,ZHANG Guo-qing,HAN Bing,LI Xiang-yang,WANG Qing-zhang.New Type of Sacrificial Anode Design and Performance Research Using in Marine Engineering (Ⅰ) — Experimental Study on Static Seawater of Small Size Anode[J].Equipment Environmental Engineering,2016,13(2):63-70. |
Objective A new type of sacrificial anode was designed to meet the protection current demand at different times of marine engineering steel structures and achieve the purpose of saving the amount of sacrificial anode. Methods By changing the area to weight ratios of the conventional anode, the same area and quality of conventional anode and new type anode were designed, respectively, and the comparative tests of cathodic protection in static seawater were carried out. Results One new type of anode, saving nearly 50% by mass, realized the similar current outputs with the same area of conventional anode. Another new type of anode, owning similar quality with the conventional anode, was increased nearly 70% of the surface area, and achieved the current outputs increasing 18% at the initial stage and 14% throughout the test, and the rapid polarization of the protected specimens. Conclusion By increasing the area to weight ratios of conventional anode, it is feasible to reduce the anode-to-electrolyte resistance, and then increase the current outputs. |