张广生,丁伟国,姜波,王超,宋仁国.电源模式对ADC12高硅铝合金微弧氧化膜层组织与性能的影响[J].装备环境工程,2020,17(8):97-103. ZHANG Guang-sheng,DING Wei-guo,JIANG Bo,WANG Chao,SONG Ren-guo.Effects of Power Supply Modes on the Microstructure and Properties of Micro-arc Oxidation Coatings Formed on ADC12 High Silicon Aluminum Alloy[J].Equipment Environmental Engineering,2020,17(8):97-103.
电源模式对ADC12高硅铝合金微弧氧化膜层组织与性能的影响
Effects of Power Supply Modes on the Microstructure and Properties of Micro-arc Oxidation Coatings Formed on ADC12 High Silicon Aluminum Alloy
投稿时间:2020-07-18  修订日期:2020-07-29
DOI:10.7643/issn.1672-9242.2020.08.015
中文关键词:  高硅铝合金  电源模式  微弧氧化  陶瓷膜层  组织  性能
英文关键词:high silicon aluminum alloy  power supply mode  micro arc oxidation  ceramic coating  microstructure  property
基金项目:国家自然科学基金(51871031)
作者单位
张广生 常州大学 材料科学与工程学院 江苏省材料表面科学与技术重点实验室,江苏 常州 213164 
丁伟国 新昌县迪嘉轻金属科技有限公司,浙江 绍兴 312500 
姜波 常州大学 材料科学与工程学院 江苏省材料表面科学与技术重点实验室,江苏 常州 213164 
王超 常州大学 材料科学与工程学院 江苏省材料表面科学与技术重点实验室,江苏 常州 213164 
宋仁国 常州大学 材料科学与工程学院 江苏省材料表面科学与技术重点实验室,江苏 常州 213164;新昌县迪嘉轻金属科技有限公司,浙江 绍兴 312500 
AuthorInstitution
ZHANG Guang-sheng School of Materials Science and Engineering, Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou 213164, China 
DING Wei-guo Xinchang County Dijia Light Metals Science and Technology Co., Ltd, Shaoxing 312500, China 
JIANG Bo School of Materials Science and Engineering, Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou 213164, China 
WANG Chao School of Materials Science and Engineering, Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou 213164, China 
SONG Ren-guo School of Materials Science and Engineering, Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou 213164, China;Xinchang County Dijia Light Metals Science and Technology Co., Ltd, Shaoxing 312500, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 探究三种电源模式对ADC12高硅铝合金微弧氧化膜层性能的影响,从中选择对其微弧氧化膜层性能较优的电源模式。方法 在三种不同电源模式(交流电源、单极性脉冲电源和双极性脉冲电源)的条件下,应用微弧氧化(MAO)技术在ADC12高硅铝合金表面制备了陶瓷膜层,并采用扫描电镜(SEM)、X射线衍射仪(XRD)、显微硬度计、摩擦磨损试验机等手段表征ADC12铝合金微弧氧化膜层的显微组织与性能。结果 三种电源模式下微弧氧化膜层中都存在α-Al2O3、γ-Al2O3和Al9Si等物相;双脉冲模式下制备的微弧氧化膜层的致密性最好,厚度为15 μm,硬度达到719 HV,摩擦系数为1.2左右,膜层与基体开始脱落的载荷为25.8 N。交流模式下制备的微弧氧化膜层膜厚较低,厚度为9 μm,硬度达到698 HV,摩擦系数为1.35左右,膜层与基体开始脱落的载荷为19.5 N。单极性模式下制备的微弧氧化膜层厚度为17 μm,但硬度为706 HV,摩擦系数为1.35左右,膜层与基体开始脱落的载荷为13.09 N。结论 通过三种电源模式的比较,ADC12高硅铝合金在双极性脉冲电源模式下制得膜层的综合性能较好。
英文摘要:
      The work aims to study the effects of three power modes on the performance of micro arc oxidation coating on ADC12 high silicon aluminum alloy, so as to select the power mode leading to the better performance of micro arc oxidation coating. Under three different power supply modes (AC power supply, unipolar pulse power supply and bipolar pulse power supply), ceramic coatings were prepared on the surface of ADC12 high silicon aluminum alloy by micro arc oxidation (MAO) technology. The microstructure and properties of micro arc oxidation coating on ADC12 aluminum alloy were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), microhardness tester and friction and wear tester. α-Al2O3, γ-Al2O3 and Al9Si phases existed in the micro arc oxidation coating under three power supply modes. The micro arc oxidation coating prepared under double pulse mode had the best compactness, with a thickness of 15 μm, a hardness of 719 HV, a friction coefficient of about 1.2, and a load leading to falling of coating and substrate of 25.8 N. The MAO coating prepared under the AC power supply had the lowest thickness of 9 μm, a hardness of 698 HV, a friction coefficient of about 1.35, and a load leading to falling of coating and substrate of 15.9 N. The MAO coating under the unipolar mode had a thickness of 17 μm, a hardness of 706 HV, a friction coefficient of about 1.35, and a load leading to falling of coating and substrate of 13.09 N. Through the comparison of three power supply modes, the comprehensive performance of the coating on ADC12 high silicon aluminum alloy under bipolar pulse power supply mode is better.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第13417962位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号