周炀挺,杨永生,尹娇妹,王鑫磊.基于DELMIA的载人离心机座舱装配仿真[J].装备环境工程,2022,19(10):134-140. ZHOU Yang-ting,YANG Yong-sheng,YIN Jiao-mei,WANG Xin-lei.Assembly Simulation of Human Centrifuge Cockpit Based on DELMIA[J].Equipment Environmental Engineering,2022,19(10):134-140.
基于DELMIA的载人离心机座舱装配仿真
Assembly Simulation of Human Centrifuge Cockpit Based on DELMIA
  
DOI:10.7643/issn.1672-9242.2022.10.018
中文关键词:  DELMIA  座舱装配  装配仿真  人机工程仿真中图分类号:TH164 文献标识码:A 文章编号:1672-9242(2022)10-0134-07
英文关键词:DELMIA  cockpit assembly  assembly simulation  ergonomic simulation
基金项目:
作者单位
周炀挺 中国工程物理研究院 总体工程研究所,四川 绵阳 621900 
杨永生 中国工程物理研究院 总体工程研究所,四川 绵阳 621900 
尹娇妹 中国工程物理研究院 总体工程研究所,四川 绵阳 621900 
王鑫磊 中国工程物理研究院 总体工程研究所,四川 绵阳 621900 
AuthorInstitution
ZHOU Yang-ting Institute of Systems Engineering,CAEP, Sichuan Mianyang 621900, China 
YANG Yong-sheng Institute of Systems Engineering,CAEP, Sichuan Mianyang 621900, China 
YIN Jiao-mei Institute of Systems Engineering,CAEP, Sichuan Mianyang 621900, China 
WANG Xin-lei Institute of Systems Engineering,CAEP, Sichuan Mianyang 621900, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 形成合理的座舱装配工艺方案,提高装配质量和效率,并能在设计阶段发现座舱装配工艺方案存在的问题。方法 通过分析座舱结构特征和装配特点,并基于DELMIA数字化制造仿真平台,对载人离心机座舱的装配信息进行构建与分析。运用干涉和碰撞检查,结合人机功效模块,对座舱装配过程进行仿真分析。结果 座舱装配仿真是验证其装配工艺方案是否合理的有效手段,通过座舱装配仿真,提前发现了装配工艺方案存在装配动态干涉、可达性和可视性等问题。结论 数字化装配技术可以帮助设计人员预先发现装配工艺方案的不足,改进装配工艺方案,验证装备工艺方案的可行性,为实际装配提供指导,进而可极大地提高装配效率,缩短装备研制周期。
英文摘要:
      On-site assembly of the human centrifuge cockpit is a complicated process that requires repeated optimization, this paper aims to form a reasonable cockpit assembly process plan, improve assembly quality and efficiency, and find problems in the cockpit assembly plan at the design stage. By analyzing the structural characteristics and assembly characteristics of the cockpit and based on the DELMIA digital manufacturing simulation platform, we constructed and analyzed the assembly information of the human centrifuge cockpit. Using interference and collision inspection, combined with the human-machine function module, we also simulated and analyzed the cockpit assembly process. Cockpit assembly simulation is an effective means to verify whether the assembly process plan is reasonable, through the cockpit assembly simulation, it is discovered in advance that the assembly process plan has the problems of assembly dynamic interference, accessibility, and visibility. Digital assembly technology can help designers discover the deficiencies of the assembly process plan in advance, improve the assembly process plan, verify the feasibility of the equipment process plan, and provide guidance for actual assembly, thereby greatly improving assembly efficiency and shortening the equipment development cycle.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第13535478位访问者    渝ICP备15012534号-5

版权所有:《装备环境工程》编辑部 2014 All Rights Reserved

邮编:400039     电话:023-68792835    Email: zbhjgc@163.com

视频号 公众号