万铖,金平,谭晓明,王德.基于 ABAQUS 的复合材料低速冲击损伤分析[J].装备环境工程,2014,11(5):38-42. WAN Cheng,JIN Ping,TAN Xiao-ming,WANG De.Analysis for the Damage of Composites under Low-velocity Impact Based on ABAQUS[J].Equipment Environmental Engineering,2014,11(5):38-42. |
基于 ABAQUS 的复合材料低速冲击损伤分析 |
Analysis for the Damage of Composites under Low-velocity Impact Based on ABAQUS |
投稿时间:2014-01-08 修订日期:2014-01-18 |
DOI:10. 7643 /issn. 1672-9242. 2014. 05. 008 |
中文关键词: 复合材料 冲击 ABAQUS |
英文关键词:composites impact ABAQUS |
基金项目: |
|
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目 的 分析不同 冲击能量对复合材料层合板的 损伤情况, 验证有限元模型的 合理性和有效性。 方法 以 CCF300 /10128H 型碳纤维树脂基复合材料层合板为研究对象, 采用 落锤冲击试验机对层合板进行冲 击实 验, 然 后 对冲 击后 的 试验件进行超声 C 扫 描。 建立 有限元模型, 运用ABAQUS 软件对冲击过程进行模拟。 结果 有限元模拟结果与 实验结果吻合良好。 结论 复合材料层合板内 部损伤随着冲击能量的 增大而快速变大。 出 现穿透损伤以 后, 损伤趋于平缓, 有限元模型能够较好地预测复合材料低速冲击损伤。 |
英文摘要: |
Objective To analyze the damage of composite laminates under different impact and to verify the rationality and validity of the finite element model. Methods Drop hammer impact test machine was used for the CCF300 /10128H fiber resin matrix composite laminates, after that, Ultrasonic C-scan was used to scan the test piece. And then a finite element model was established, ABAQUS was used to simulate the impact process. Results The results of finite element simulation were in good agreement with the experimental results. Conclusion The internal damage rapidly increased with the increasing impact. When penetrated damage occurred, the damage became mild, and the finite element could relatively well predict low-impact damage of composites. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|