Simulation Design of Multi-device Joint Strong EMP Protection Module at L-band
Received:March 07, 2024  Revised:April 03, 2024
View Full Text  View/Add Comment  Download reader
DOI:10.7643/issn.1672-9242.2024.04.017
KeyWord:strong EMP protection  transient voltage suppression diodes  gas discharge tubes  microstrip bandpass filters  RF front-end  strong electromagnetic pulse
              
AuthorInstitution
XU Yang Hubei Medical Devices Quality Supervision and Test Institute, Wuhan , China;Huazhong University of Science and Technology, Wuhan , China
FU Haitao Hubei Medical Devices Quality Supervision and Test Institute, Wuhan , China
XUANYUAN Yunjia Hubei Medical Devices Quality Supervision and Test Institute, Wuhan , China
ZHANG Chong Hubei Medical Devices Quality Supervision and Test Institute, Wuhan , China
CHEN Rui Hubei Medical Devices Quality Supervision and Test Institute, Wuhan , China
Hits:
Download times:
Abstract:
      The work aims to design a strong EMP protection module for L-band RF front-end sensitive devices and carry out a joint simulation design with transient voltage suppression diodes, gas discharge tubes and hairpin microstrip bandpass filters. The transient voltage suppression diode had a fast response time, the gas discharge tube had a high power capacity, and the microstrip bandpass filter separated the noise signal and retained the active signal. By combining these devices in the protection design, their respective advantages were fully utilized to improve system stability and provide strong EMP protection. Through the design, the module worked in the frequency band of 1.3~1.7 GHz, the insertion loss was less than 1.5 dB in the working band, and the protection effect reached 42.5 dB under 70 dBm power injection, which indicated a good protection effect. By analyzing the characteristics of various devices and optimizing the design, the study achieves the protection of the L-band spectrum, which has important practical value and broad application prospects.
Close