| 卢丽金,沈祖辉.浅谈军用飞机外挂系统机械环境适应性设计鉴定流程[J].装备环境工程,2020,17(9):194-199. LU Li-jin,SHEN Zu-hui.Appraisal Procedure for Mechanical Environment Adaptability DesignExternal Hanging System of Military Aircraft[J].Equipment Environmental Engineering,2020,17(9):194-199. |
| 浅谈军用飞机外挂系统机械环境适应性设计鉴定流程 |
| Appraisal Procedure for Mechanical Environment Adaptability DesignExternal Hanging System of Military Aircraft |
| 投稿时间：2020-07-06 修订日期：2020-07-13 |
| DOI：10.7643/issn.1672-9242.2020.09.033 |
| 中文关键词: 外挂系统 机械环境 研制流程 |
| 英文关键词:external hanging system mechanical environment validation procedure |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 为了建立外挂系统机械环境适应性设计及鉴定流程，通过梳理外挂系统在使用寿命周期中预期会遇到的机械环境约束条件，确定外挂系统设计需要研究完成的内容，包括技术要求制定、验证/分析方法、试验/评估结果评定等。详细阐述了机械环境适应性设计必要性，正向定量/定性设计方法以及机械环境鉴定试验流程需要考虑的内容。形成了外挂系统机械环境设计及鉴定流程。以某外挂系统机械环境适应性设计鉴定为例，验证了流程的有效性及经济性。 |
| 英文摘要: |
| The paper aims to develop mechanical environment adaptability design and validation procedures of external hanging system. By sorting out the mechanical environment constraints expected to be encountered in the service life cycle of the external hanging system, the contents to be completed in the design of the external hanging system were determined, including the formulation of technical requirements, verification/analysis methods, evaluation of test/evaluation results, etc. The necessity of mechanical environment adaptability design, the forward quantitative/qualitative design method and the contents to be considered in the process of mechanical environment validation test were expounded in detail. The mechanical environmental design and validation procedure of external hanging system for mechanical environment is built. Finally, the effectiveness and economical efficiency of the procedure is verified by the mechanical environment adaptability design and validation procedure of an external hanging system. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
