[1] KAMATH G M, MANGALGIRI P D, SHET A.A Quantitative Assessment of the Impact of Corrosion on Fatigue Life of Aircraft Components[J]. Engineering Failure Analysis, 2022, 133: 105973.
[2] CHAMPAGNE V, HELFRITCH D.Critical Assessment 11: Structural Repairs by Cold Spray[J]. Materials Science and Technology, 2015, 31(6): 627-634.
[3] WANG Q G, APELIAN D, LADOS D A.Fatigue Behavior of A356-T6 Aluminum Cast Alloys. Part I. Effect of Casting Defects[J]. Journal of Light Metals, 2001, 1(1): 73-84.
[4] MOFOKENG T, MATIVENGA P T, MARNEWICK A.Analysis of Aircraft Maintenance Processes and Cost[J]. Procedia CIRP, 2020, 90: 467-472.
[5] FINDLAY S J, HARRISON N D.Why Aircraft Fail[J]. Materials Today, 2002, 5(11): 18-25.
[6] PAPYRIN A, KOSAREV V, KLINKOV S, et al.Cold Spray Technology[M]. Amsterdam: Elsevier Science, 2007.
[7] CHAMPAGNE V K.The Cold Spray Materials Deposition Process: Fundamentals and Applications[M]. Cambridge: Woodhead Publishing, 2007.
[8] VILLAFUERTE J.Modern Cold Spray: Materials, Process, and Applications[M]. Cham: Springer International Publishing, 2015.
[9] TEJERO-MARTIN D, REZVANI RAD M, MCDONALD A, et al.Beyond Traditional Coatings: A Review on Thermal-Sprayed Functional and Smart Coatings[J]. Journal of Thermal Spray Technology, 2019, 28(4): 598-644.
[10] WU X K, ZHANG J S, ZHOU X L, et al.Advanced Cold Spray Technology: Deposition Characteristics and Potential Applications[J]. Science China Technological Sciences, 2012, 55(2): 357-368.
[11] LI W Y, YANG K, YIN S, et al.Solid-State Additive Manufacturing and Repairing by Cold Spraying: A Review[J]. Journal of Materials Science & Technology, 2018, 34(3): 440-457.
[12] YIN S, CAVALIERE P, ALDWELL B, et al.Cold Spray Additive Manufacturing and Repair: Fundamentals and Applications[J]. Additive Manufacturing, 2018, 21: 628-650.
[13] STOLTENHOFF T, KREYE H, RICHTER H J.An Analysis of the Cold Spray Process and Its Coatings[J]. Journal of Thermal Spray Technology, 2002, 11(4): 542-550.
[14] YIN S, MEYER M, LI W Y, et al.Gas Flow, Particle Acceleration, and Heat Transfer in Cold Spray: A Review[J]. Journal of Thermal Spray Technology, 2016, 25(5): 874-896.
[15] TAHERKHANI F, LIST A, KELLER S, et al.The Influence of Spraying Parameters and Powder Sizes on the Microstructure and Mechanical Behavior of Cold-Sprayed Inconel®625 Deposits[J]. Journal of Thermal Spray Technology, 2024, 33(2): 652-665.
[16] ASSADI H, GÄRTNER F, STOLTENHOFF T, et al. Bonding Mechanism in Cold Gas Spraying[J]. Acta Materialia, 2003, 51(15): 4379-4394.
[17] SCHMIDT T, GÄRTNER F, ASSADI H, et al. Development of a Generalized Parameter Window for Cold Spray Deposition[J]. Acta Materialia, 2006, 54(3): 729-742.
[18] ASSADI H, SCHMIDT T, RICHTER H, et al.On Parameter Selection in Cold Spraying[J]. Journal of Thermal Spray Technology, 2011, 20(6): 1161-1176.
[19] GRUJICIC M, ZHAO C L, DEROSSET W S, et al.Adiabatic Shear Instability Based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process[J]. Materials & Design, 2004, 25(8): 681-688.
[20] HASSANI-GANGARAJ M, VEYSSET D, CHAMPAGNE V K, et al.Response to Comment on “Adiabatic Shear Instability Is Not Necessary for Adhesion in Cold Spray”[J]. Scripta Materialia, 2019, 162: 515-519.
[21] KIM K, KURODA S, WATANABE M, et al.Comparison of Oxidation and Microstructure of Warm-Sprayed and Cold-Sprayed Titanium Coatings[J]. Journal of Thermal Spray Technology, 2012, 21(3): 550-560.
[22] CHAMPAGNE V K Jr, OZDEMIR O C, NARDI A. Practical Cold Spray[M]. Cham: Springer International Publishing, 2021.
[23] VRC Metal Systems. Informational Brochures[EB/OL].2026. https://vrcmetalsystems.com/resources/informational-brochures/.
[24] 湖北超卓航空科技股份有限公司. 冷喷涂技术在航空维修(MRO)领域的革命性应用[EB/OL].2026. https://www.cz-tec.com/list_25/400.html.
Hubei Zhuochao Aviation Technology Co., Ltd. Revolutionary Application of Cold Spray Technology in Aviation Maintenance, Repair and Overhaul (MRO)[EB/OL].2026. https://www.cz-tec.com/list_25/400.html.
[25] DOWDING I, HASSANI M, SUN Y C, et al.Particle Size Effects in Metallic Microparticle Impact-Bonding[J]. Acta Materialia, 2020, 194: 40-48.
[26] NACCARELLI A, AUMAN W, REISS J, et al.Nozzle Clogging in Cold Spray of Aluminum 6061 through 304 Stainless Steel Split Nozzles: Mechanisms, Observations, and Quantitative Measurements[J]. Materialia, 2026, 45: 102668.
[27] XIONG Y M, ZHUANG W, ZHANG M X.Effect of the Thickness of Cold Sprayed Aluminium Alloy Coating on the Adhesive Bond Strength with an Aluminium Alloy Substrate[J]. Surface and Coatings Technology, 2015, 270: 259-265.
[28] WANG Q, BIRBILIS N, ZHANG M X.Interfacial Structure between Particles in an Aluminum Deposit Produced by Cold Spray[J]. Materials Letters, 2011, 65(11): 1576-1578.
[29] ZHANG D, SHIPWAY P H, MCCARTNEY D G.Cold Gas Dynamic Spraying of Aluminum: The Role of Substrate Characteristics in Deposit Formation[J]. Journal of Thermal Spray Technology, 2005, 14(1): 109-116.
[30] LIU T, VAUDIN M D, BUNN J R, et al.Quantifying Dislocation Density in Al-Cu Coatings Produced by Cold Spray Deposition[J]. Acta Materialia, 2020, 193: 115-124.
[31] LIU T, LEAZER J D, MENON S K, et al.Microstructural Analysis of Gas Atomized Al-Cu Alloy Feedstock Powders for Cold Spray Deposition[J]. Surface and Coatings Technology, 2018, 350: 621-632.
[32] TAO H W, CAI Q F, CHEN M, et al.Effect of Heat Treatment on the Microstructure and Corrosion Performance of 2219 Al Alloy Cold Sprayed Coatings[J]. Corrosion Science, 2024, 241: 112526.
[33] ZHANG Z, MENG T L, LEE C J J, et al. Experimental and Numerical Study of Al2219 Powders Deposition on Al2219-T6 Substrate by Cold Spray: Effects of Spray Angle, Traverse Speed, and Standoff Distance[J]. Materials, 2023, 16(15): 5240.
[34] KIM M, PEREZ-ANDRADE L, BREWER L N, et al.Effect of Microstructure on Corrosion Behavior of Cold Sprayed Aluminum Alloy 5083[J]. Corrosion and Materials Degradation, 2024, 5(1): 27-51.
[35] YANG X W, LI W Y, YU S Q, et al.Electrochemical Characterization and Microstructure of Cold Sprayed AA5083/Al₂O₃ Composite Coatings[J]. Journal of Materials Science & Technology, 2020, 59: 117-128.
[36] ROKNI M R, WIDENER C A, CHAMPAGNE V R.Microstructural Stability of Ultrafine Grained Cold Sprayed 6061 Aluminum Alloy[J]. Applied Surface Science, 2014, 290: 482-489.
[37] ROKNI M R, WIDENER C A, OZDEMIR O C, et al.Microstructure and Mechanical Properties of Cold Sprayed 6061 Al in As-Sprayed and Heat Treated Condition[J]. Surface and Coatings Technology, 2017, 309: 641-650.
[38] LIU C X, CHU X R, WANG N J, et al.Effects of a Hybrid Post-Treatment on Microstructure and Mechanical Properties of Cold Sprayed AA7050 Deposits[J]. Journal of Alloys and Compounds, 2024, 985: 174031.
[39] ZHU N, BREWER L N.Characterization of Microstructural and Precipitates Evolution in Cold Sprayed AA7050 after in Situ Laser Heat Treatment[J]. Surface and Coatings Technology, 2023, 462: 129491.
[40] BI J K, LOKE Z C K, LIM C K R, et al. Mechanical Properties of Cold Sprayed Aluminium 2024 and 7075 Coatings for Repairs[J]. Aerospace, 2022, 9(2): 65.
[41] ROKNI M R, WIDENER C A, CHAMPAGNE V K, et al.Microstructure and Mechanical Properties of Cold Sprayed 7075 Deposition during Non-Isothermal Annealing[J]. Surface and Coatings Technology, 2015, 276: 305-315.
[42] RECH S, TRENTIN A, VEZZÙ S, et al.High Thickness A-357 Aluminium Alloys Coatings Deposited by Coldspray for the Repair of Aeronautic Components Cold Spray for Repairing of Al Alloy Aeronautic Components Feedstock Porosity and Shrinkages A-357 Castings. Unpublished, 2011.
[43] PETRÁČKOVÁ K, KONDÁS J, GUAGLIANO M. Mechanical Performance of Cold-Sprayed A357 Aluminum Alloy Coatings for Repair and Additive Manufacturing[J]. Journal of Thermal Spray Technology, 2017, 26(8): 1888-1897.
[44] HASSANI-GANGARAJ S M, MORIDI A, GUAGLIANO M. Critical Review of Corrosion Protection by Cold Spray Coatings[J]. Surface Engineering, 2015, 31(11): 803-815.
[45] CHAMPAGNE V K, HELFRITCH D D, LEYMAN P F.Magnesium Repair by Cold Spray[J]. Plating and Surface Finishing. 2008, 95(9): 19-28.
[46] TAN A W, SUN W, PHANG Y P, et al.Effects of Traverse Scanning Speed of Spray Nozzle on the Microstructure and Mechanical Properties of Cold-Sprayed Ti₆Al₄V Coatings[J]. Journal of Thermal Spray Technology, 2017, 26(7): 1484-1497.
[47] BAE G, KUMAR S, YOON S, et al.Bonding Features and Associated Mechanisms in Kinetic Sprayed Titanium Coatings[J]. Acta Materialia, 2009, 57(19): 5654-5666.
[48] WONG W, REZAEIAN A, IRISSOU E, et al. Cold Spray Characteristics of Commercially Pure Ti and Ti-6Al-4V[J]. Advanced Materials Research.2010, 89-91: 639-644.
[49] BRIZUELA-COLMENARES N, PÉREZ-ANDRADE L I, PEREZ S, et al. Mechanical and Microstructural Behavior of Inconel 625 Deposits by High-Pressure Cold Spray and Laser Assisted Cold Spray[J]. Surface and Coatings Technology, 2024, 485: 130917.
[50] KARAKAŞ A, ATAEE A, RATHI A, et al.Post Heat Treatment Optimization of Cold Spray Additive Manufactured Inconel 718[J]. Scientific Reports, 2025, 15: 7361.
[51] ZHANG Z, SENG D H L, LIN M, et al. Cold Spray Deposition of Inconel 718 in Comparison with Atmospheric Plasma Spray Deposition[J]. Applied Surface Science, 2021, 535: 147704.
[52] SU H, LUO X T, LI C J.Dense and Fine Grained IN718 Superalloy Additively Manufactured by Cold Spraying with N₂ Gas at 10 MPa[J]. Materials Science and Engineering: A, 2025, 927: 148017.
[53] IRISSOU E, LEGOUX J G, ARSENAULT B, et al.Investigation of Al-Al₂O₃ Cold Spray Coating Formation and Properties[J]. Journal of Thermal Spray Technology, 2007, 16(5): 661-668.
[54] HUANG C J, LIST A, WIEHLER L, et al.Cold Spray Deposition of Graded Al-SiC Composites[J]. Additive Manufacturing, 2022, 59: 103116.
[55] BAYHAN M, ÖNEL K.Optimization of Reinforcement Content and Sliding Distance for AlSi₇Mg/SiCp Composites Using Response Surface Methodology[J]. Materials & Design, 2010, 31(6): 3015-3022.
[56] XIE X L, CHEN C Y, CHEN Z, et al.Achieving Simultaneously Improved Tensile Strength and Ductility of a Nano-TiB₂/AlSi₁₀Mg Composite Produced by Cold Spray Additive Manufacturing[J]. Composites Part B: Engineering, 2020, 202: 108404.
[57] EDEN J T. Portable Cold Spray Repair and Restoration of NAVAIR Assets. IMAST News[EB/OL].2013. https://www.arl.psu.edu/wp-content/uploads/filr/2458/IMAST%20News%202013-2.pdf.
[58] DOAN L. Status of NC Primer Demonstration & Transition[EB/OL].2020. https://s3.us-gov-west-1.amazonaws.com/sepub-demo-0001-124733793621-us-gov-west-1/s3fs-public/2022-06%2FDoanAsets2020.pdfutm_source=chatgpt.com.
[59] The Rise of Cold Spray Technology at Fleet Readiness Center Southwest[EB/OL].2026. https://navalaviationnews.navy.mil/Editorial-Staff-Tools/Article-Submission/Article/3729413/the-rise-of-cold-spray-technology-at-fleet-readiness-center-southwest/.
[60] Department of Defense. Materials Deposition, Cold Spray: MIL-STD-3021[S]. Washington: Department of Defense, 2015.
[61] 池亚达, 崔敏超, 罗明, 等. 基于冷喷涂的航空再制造技术研究现状及展望[J]. 航空工程进展, 2024, 15(6): 97-114.
CHI Y D, CUI M C, LUO M, et al.Current Status and Prospects of Aviation Remanufacturing Technology Based on Cold Spray[J]. Advances in Aeronautical Science and Engineering, 2024, 15(6): : 97-114.
[62] 李长久. 中国冷喷涂研究进展[J]. 中国表面工程, 2009, 22(4): 5-14.
LI C J.The State-of-Art of Research and Development on Cold Spraying in China[J]. China Surface Engineering, 2009, 22(4): 5-14.
[63] 石仲川, 汤智慧, 王长亮. Д-30发动机中央传动机匣表面涂层的冷喷涂修复[J]. 航空维修与工程, 2014(6): 47-48.
SHI Z C, TANG Z H, WANG C L.Cold Spray Repair for Coating of Main Gearbox InД-30Engine[J]. Aviation Maintenance & Engineering, 2014(6): 47-48.
[64] 石仲川, 刘德鑫, 张晓云,等冷喷涂技术的研究现状及在航空工业领域内的应用[J]. 材料导报, 2012, 26(17): 70-74.
SHI Z C, LIU D X, ZHANG X Y, et al.Research Status of Cold Spray Technology and Its Application in Aviation Industry[J]. Materials Reports, 2012, 26(17): 70-74.
[65] 管宇, 陈亮, 曹奇凯. 基于增量考核的飞机延寿方法与应用[J]. 航空学报, 2021, 42(8): 219-234.
GUAN Y, CHEN L, CAO Q K.Aircraft Life Extension Based on Incremental Assessment: Method and Application[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(8): 219-234.
[66] WALCH L J.Economic Impact of Cold Spray in North American Aerospace Industry: A Case Study[J]. Welding and Cutting, 2019, 18(2): 111-113.
[67] DEFORCE B S, EDEN T J, POTTER J K.Cold Spray Al-5% Mg Coatings for the Corrosion Protection of Magnesium Alloys[J]. Journal of Thermal Spray Technology, 2011, 20(6): 1352-1358.
[68] LI W Y, CAO C C, YIN S.Solid-State Cold Spraying of Ti and Its Alloys: A Literature Review[J]. Progress in Materials Science, 2020, 110: 100633.
[69] BORUAH D, ZHANG X, MCNUTT P, et al.Effect of Post-Deposition Thermal Treatments on Tensile Properties of Cold Sprayed Ti₆Al₄V[J]. Metals, 2022, 12(11): 1908.
[70] VO P, IRISSOU E, LEGOUX J G, et al.Mechanical and Microstructural Characterization of Cold-Sprayed Ti-6Al-4V after Heat Treatment[J]. Journal of Thermal Spray Technology, 2013, 22(6): 954-964.
[71] PETROVSKIY P, TRAVYANOV A, CHEVERIKIN V V, et al.Effect of Encapsulated Hot Isostatic Pressing on Properties of Ti₆Al₄V Deposits Produced by Cold Spray[J]. The International Journal of Advanced Manufacturing Technology, 2020, 107(1): 437-449.
[72] CHEN C Y, XIE Y C, YAN X C, et al.Effect of Hot Isostatic Pressing (HIP) on Microstructure and Mechanical Properties of Ti₆Al₄V Alloy Fabricated by Cold Spray Additive Manufacturing[J]. Additive Manufacturing, 2019, 27: 595-605.
[73] Plasma Giken Co, Ltd. Application Examples of Cold Spray[EB/OL]. 2026. http://plasma.co.jp/en/service/cold/examples/.
[74] LI Y J, LUO X T, LI C J.Improving Deposition Efficiency and Inter-Particle Bonding of Cold Sprayed Cu through Removing the Surficial Oxide Scale of the Feedstock Powder[J]. Surface and Coatings Technology, 2021, 407: 126709.
[75] MIN K M, PARK J S, KIM H, et al.Solid-State Additive Manufacturing of Structurally Robust and Bondable Copper Coatings on Aluminum Substrates[J]. Materials Characterization, 2025, 227: 115290.
[76] HUANG R, FUKANUMA H.Study of the Influence of Particle Velocity on Adhesive Strength of Cold Spray Deposits[J]. Journal of Thermal Spray Technology, 2012, 21(3): 541-549.
[77] PRASHAR G, VASUDEV H.A Comprehensive Review on the Analysis of Adhesion Strength of Cold Spray Deposits[J]. Results in Surfaces and Interfaces, 2024, 16: 100263.
[78] 成佳, 张科杰, 黎海凡, 等. 冷喷涂AlSi7MgA涂层组织和力学性能研究[J]. 表面技术, 2026, 55(3): 273-281.
CHENG J, ZHANG K J, LI H F, et al.Microstructure and Mechanical Properties of Cold-Sprayed AlSi7MgA Coating[J]. Surface Technology, 2026, 55(3): 273-281.
[79] SONG X, JIN X Z, ZHAI W, et al.Correlation between the Macroscopic Adhesion Strength of Cold Spray Coating and the Microscopic Single-Particle Bonding Behaviour: Simulation, Experiment and Prediction[J]. Applied Surface Science, 2021, 547: 149165.
[80] GOLDBAUM D, SHOCKLEY J M, CHROMIK R R, et al.The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti₆Al₄V Cold Spray Splats[J]. Journal of Thermal Spray Technology, 2012, 21(2): 288-303.
[81] BORUAH D, ZHANG X.Effect of Post-Deposition Solution Treatment and Ageing on Improving Interfacial Adhesion Strength of Cold Sprayed Ti₆Al₄V Coatings[J]. Metals, 2021, 11(12): 2038.
[82] MA W H, XIE Y C, CHEN C Y, et al.Microstructural and Mechanical Properties of High-Performance Inconel 718 Alloy by Cold Spraying[J]. Journal of Alloys and Compounds, 2019, 792: 456-467.
[83] HUSSAIN T, MCCARTNEY D G, SHIPWAY P H, et al.Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components[J]. Journal of Thermal Spray Technology, 2009, 18(3): 364-379.
[84] XIE Y C, YIN S, CIZEK J, et al.Formation Mechanism and Microstructure Characterization of Nickel-Aluminum Intertwining Interface in Cold Spray[J]. Surface and Coatings Technology, 2018, 337: 447-452.
[85] ZHANG Z C, LIU Z Q, WANG B, et al.Atomic Inter-Diffusion between Al Particle and Ni Substrate for Metallurgical Bonding during Cold Spraying Process[J]. Applied Surface Science, 2025, 684: 161972.
[86] TAN A W, SUN W, BHOWMIK A, et al.Effect of Substrate Surface Roughness on Microstructure and Mechanical Properties of Cold-Sprayed Ti₆Al₄V Coatings on Ti₆Al₄V Substrates[J]. Journal of Thermal Spray Technology, 2019, 28(8): 1959-1973.
[87] YIN S, WANG X F, LI W Y, et al.Effect of Substrate Hardness on the Deformation Behavior of Subsequently Incident Particles in Cold Spraying[J]. Applied Surface Science, 2011, 257(17): 7560-7565.
[88] GHARA T, PAUL S, BANDYOPADHYAY P P.Effect of Grit Blasting Parameters on Surface and Near-Surface Properties of Different Metal Alloys[J]. Journal of Thermal Spray Technology, 2021, 30(1): 251-269.
[89] WILLIAMSON C J, WEBB A R, BREWER L N, et al.Effect of Powder Heat Treatment on Fatigue Mechanisms of Freestanding AA7075 Cold Spray Deposits[J]. International Journal of Fatigue, 2023, 167: 107256.
[90] STORY W A, BREWER L N.Heat Treatment of Gas-Atomized Powders for Cold Spray Deposition[J]. Metallurgical and Materials Transactions A, 2018, 49(2): 446-449.
[91] Anonymous. Ti-6Al-4V Impact Cold Spray System[EB/OL].2026. https://impact-innovations.com/en/materials/ti6al4v/.
[92] ROKNI M R, NARDI A T, CHAMPAGNE V K, et al.Effects of Preprocessing on Multi-Direction Properties of Aluminum Alloy Cold-Spray Deposits[J]. Journal of Thermal Spray Technology, 2018, 27(5): 818-826.
[93] ROKNI M R, WIDENER C A, CHAMPAGNE V K, et al.The Effects of Heat Treatment on 7075 Al Cold Spray Deposits[J]. Surface and Coatings Technology, 2017, 310: 278-285.
[94] DORMAN S E G, RAUSCH J W, AUSHERMAN M J, et al. Evaluation of Cold Spray for Aircraft Repair[C]// Proceedings of the 31st ICAF. 2023.
[95] YANDOUZI M, GAYDOS S, GUO D, et al.Aircraft Skin Restoration and Evaluation[J]. Journal of Thermal Spray Technology, 2014, 23(8): 1281-1290.
[96] JONES R, MATTHEWS N, RODOPOULOS C A, et al.On the Use of Supersonic Particle Deposition to Restore the Structural Integrity of Damaged Aircraft Structures[J]. International Journal of Fatigue, 2011, 33(9): 1257-1267.
[97] BAKIR A A, REED R, ZHANG X, et al.Fatigue Performance of Cold Spray Repaired Aluminium Alloy 7075[J]. International Journal of Fatigue, 2025: 109036.
[98] WHITE B, STORY W, BREWER L, et al.Fatigue Behaviour of Fastener Holes in High-Strength Aluminium Plates Repaired by Cold Spray Deposition[J]. Fatigue & Fracture of Engineering Materials & Structures, 2020, 43(2): 317-329.
[99] SUHONEN T, VARIS T, DOSTA S, et al.Residual Stress Development in Cold Sprayed Al, Cu and Ti Coatings[J]. Acta Materialia, 2013, 61(17): 6329-6337.
[100] DIAB M, PANG X, JAHED H.The Effect of Pure Aluminum Cold Spray Coating on Corrosion and Corrosion Fatigue of Magnesium (3% Al-1% Zn) Extrusion[J]. Surface and Coatings Technology, 2017, 309: 423-435.
[101] WEI Y K, LUO X T, LI C X, et al.Optimization of In-Situ Shot-Peening-Assisted Cold Spraying Parameters for Full Corrosion Protection of Mg Alloy by Fully Dense Al-Based Alloy Coating[J]. Journal of Thermal Spray Technology, 2017, 26(1): 173-183.
[102] IRISSOU E, POIRIER D, VO P, et al.How to Unleash the Remarkable Potential of Cold Spray: A Perspective[J]. Journal of Thermal Spray Technology, 2022, 31(4): 908-919.
[103] LEWKE M, WU H J, LIST A, et al.Automated Trajectory Planning and Analytical Improvement for Automated Repair by Robot-Guided Cold Spray[J]. Journal of Thermal Spray Technology, 2024, 33(2): 515-529.
[104] WU H J, XIE X L, LIU M M, et al.A New Approach to Simulate Coating Thickness in Cold Spray[J]. Surface and Coatings Technology, 2020, 382: 125151.
[105] MAUER G, MOREAU C.Process Diagnostics and Control in Thermal Spray[J]. Journal of Thermal Spray Technology, 2022, 31(4): 818-828.
[106] MALAMOUSI K, DELIBASIS K, ALLCOCK B, et al.Digital Transformation of Thermal and Cold Spray Processes with Emphasis on Machine Learning[J]. Surface and Coatings Technology, 2022, 433: 128138.
[107] BOESE S, SEVINSKY A, NOURIAN-AVVAL A, et al.Laser Assisted Cold Spray of Aluminum Alloy 6061: Experimental Results[J]. Additive Manufacturing, 2024, 95: 104548.
[108] LI B, JIN Y, YAO J H, et al.Influence of Laser Irradiation on Deposition Characteristics of Cold Sprayed Stellite-6 Coatings[J]. Optics & Laser Technology, 2018, 100: 27-39.
[109] BARTON D J, BHATTIPROLU V S, THOMPSON G B, et al.Laser Assisted Cold Spray of AISI 4340 Steel[J]. Surface and Coatings Technology, 2020, 400: 126218.
[110] Department of Defense United States. Detail Specification: Powders for Cold Spray Deposition: MIL-DTL-32495A[S]. Washington: Department of Defense, 2018.
[111] SAE International.Cold Spray Additive Manufacturing (CSAM) Process: AMS7057[M]. Warrendale: SAE International, 2024.
[112] 全国增材制造标准化技术委员会. 增材制造冷喷涂工艺规范: GB/T 45858—2025[S]. 北京: 中国标准出版社, 2025.
Additive Manufacturing Standardization Technical Committee of China. Additive manufacturing—Specification for process of cold spray: GB/T 45858—2025[S]. Beijing: China Standard Press, 2025.